User manual PIONEER DJM-900SRT

[. . . ] Com/support/ DJ MIXER TABLE DE MIXAGE DJ-MISCHPULT MIXER PER DJ DJ MENGPANEEL MESA DE MEZCLAS DJ DJ микшерный пульт Français Deutsch The Pioneer DJ support site shown above offers FAQs, information on software and various other types of information and services to allow you to use your product in greater comfort. Com/ For the latest version of the Serato DJ software, access Serato. Com and download the software from there. Operating Instructions Mode d’emploi Bedienungsanleitung Istruzioni per l’uso Handleiding Manual de instrucciones Инструкции по эксплуатации Thank you for buying this Pioneer product. [. . . ] STATUS INFORMATION This function informs the DJ players of the connected channel status (on-air status, channel number, etc. Using the QUANTIZE function Effects can be applied to the sound in tempo with the currently playing track based on the GRID information of tracks that have been analyzed with Serato DJ or rekordbox. To use the QUANTIZE function with PRO DJ LINK, connect this unit and a PRO DJ LINK-compatible Pioneer DJ player beforehand. For instructions on connecting, see Connecting input terminals on page 11. In addition, music files must have been analyzed with rekordbox beforehand in order to use the QUANTIZE function. For instructions on analyzing music files with rekordbox, also see rekordbox’s operating instructions. When using in combination with the CDJ-2000nexus, first update the firmware to version 1. To use in combination with the CDJ-2000 or CDJ-900, first update the firmware to version 4. Adjusting the L/R balance of audio The left/right balance of the sound output from the [MASTER1], [MASTER2], [BOOTH], [REC OUT], [PHONES], [DIGITAL MASTER OUT] and [USB] terminals can be adjusted. To adjust the sound output from the [USB] terminals, select [MIX (REC OUT)] at [Mixer Audio Output] in the setting utility. The sound’s left/right balance changes according to the direction in which the [BALANCE] control is turned and its position. Rotating to the rightmost position outputs only the right sound of stereo audio. Rotating to the leftmost position outputs only the left sound of stereo audio. [GRID] lights on this unit’s main unit display when the GRID information has been properly received from Serato DJ or the DJ player and the QUANTIZE function can be used. [GRID] flashes if the GRID information has not been properly received. En 15 Depending on the playing status of Serato DJ or the DJ player (off air, scratching, playing in reverse, etc. ), it may not be possible to receive the GRID information. For instructions on connections, see Connecting input terminals on page 11. 2 Press the [ON/OFF] button of [BEAT EFFECTS] or touch the [X-PAD]. The effect is added to the sound in tempo with the track being played. When the [QUANTIZE] button is pressed again, the QUANTIZE function turns off. 3 Selecting the track to be monitored with rekordbox. [. . . ] The web browser is launched and the Pioneer DJ support site is displayed. 4 Click [Software Info] under [DJM-900SRT] on the Pioneer DJ support site. [Serato DJ Support Information] is displayed. 5 Click the link to the Serato DJ download page. [. . . ]