User manual PIONEER DT-505

[. . . ] Also, damage to this unit, smoke, and overheating could result from contact with liquids. Always keep the volume low enough so that you can hear sounds from outside the vehicle. If the battery is disconnected or discharged, the preset memory will be erased and must be reprogrammed. -- USB MSC (Mass Storage Class) compliant portable audio player and memory -- WMA, MP3 and WAV file playback For details about the compatibility, refer to USB audio player/USB memory compatibility on page 28. [. . . ] When playing a compressed audio disc or CD TEXT disc, you cannot switch to disc title input display. Note You can also turn this function on or off in the menu that appears by using MULTI-CONTROL. Scan play searches the song within the selected repeat range. 1 Use MULTI-CONTROL to select SCAN in the function menu. 2 Press MULTI-CONTROL to turn scan play on. The first 10 seconds of each track is played. 3 When you find the desired track press MULTI-CONTROL to turn scan play off. # If the display has automatically returned to the playback display, select SCAN again by using MULTI-CONTROL. FOLDER ­ Repeat the current folder # If you select another folder during repeat play, the repeat play range changes to disc repeat. # Performing track search or fast forward/reverse during TRACK (track repeat) changes the repeat play range to disc/folder. # When FOLDER (folder repeat) is selected, it is not possible to play back a subfolder of that folder. Press MULTI-CONTROL repeatedly to switch the segment in the following order: L (low)--M (mid)--H (high) 4 Turn MULTI-CONTROL to adjust the level of the equalization band. # You can then select another band and adjust the level. When FLAT is selected, no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve. You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (LOW/MID/HI). The factory supplied equalizer curves can be adjusted to a fine degree (nuance control). Note You can also switch to this setting mode in the menu that appears by using MULTI-CONTROL. When the subwoofer output is on, you can adjust the cut-off frequency and the output level of the subwoofer. When the subwoofer output is on, you can select SW SETTING 2. 1 Press SW to display the subwoofer setting mode. Press SW repeatedly to switch between the subwoofer setting modes in the following order. [. . . ] There may be a slight delay when starting playback of audio files on a USB portable audio player/USB memory with numerous folder hierarchies. Do not connect anything other than the USB portable audio player/USB memory. Operations may vary depending on the kind of USB audio player and a USB memory. Partitioned USB memory is not compatible with this unit. [. . . ]