User manual PIONEER DV-05

[. . . ] DVD PLAYER DV-05 Operating Instructions CONGRATULATIONS ON YOUR PURCHASE OF THIS FINE PIONEER PRODUCT. Pioneer is on the leading edge of DVD research for consumer products and this unit incorporates the latest technological developments. We are sure you will be fully satisfied with the DVD player. Thank you for your support. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. [. . . ] 48KHz discs will be played back at 48KHz. ÷ When the audio sampling frequency recorded on the disc is set as desired, output will also be switched between analog/digital output at the same time. ÷ Some 96 KHz DVDs are copy protected. With this kind of disc, no signal is output from the digital output terminal. MPEG: When a decoder or amplifier that has an MPEG input jack is used, the audio output from this unit's digital output jacks can be changed. Selection of a DVD's MPEG or linear PCM signal can be made. Settings: MPEG= PCM* (Output is in the linear PCM standard whether the signal is an MPEG signal or a linear PCM compatible signal. ) MPEG: (MPEG signal is output as is. (When using an amplifier with a built-in MPEG decoder. )) STOP MAIN SETUP OUTPUT 1 DOLBY DIGITAL 2 LINEAR PCM 3 MPEG 4 DTS DOLBY DIGITAL DOLBY DIGITAL 1/2 Setup Setup MENU EXIT ENTER ENTER PREV STOP MAIN SETUP OUTPUT 1 DOLBY DIGITAL 2 LINEAR PCM 3 MPEG 4 DTS LPCM 48KHz 2/2 Detailed Operation MENU EXIT ENTER ENTER PREV STOP MAIN SETUP OUTPUT 1 DOLBY DIGITAL 2 LINEAR PCM 3 MPEG 4 DTS MPEG MPEG =PCM 2/2 Other Information MENU EXIT ENTER ENTER PREV 4. DTS: When using an amplifier that has a DTS input jack, the DTS signal can be set to be output (ON) or not output (OFF) for DVDs that have been recorded with DTS signals. Settings: OFF* (not Output) ON (output DTS signals) STOP MAIN SETUP OUTPUT 1 DOLBY DIGITAL 2 LINEAR PCM 3 MPEG 4 DTS DTS OFF 2/2 MENU EXIT ENTER ENTER PREV Changing Settings 35 <VRB1205> Changing Picture and Sound Quality STANDBY 0 DNR STANDBY/ON FL DIMMER 41 ¡¢ 7 £¥8 DNR indicator The setting changes as follows according to how many times the MODE button is pressed. [once] DNR OFF STANDARD MEM1 [twice] OPEN/ CLOSE \ [four times] PAUSE MODE FIELD FRAME AUTO 0 AUDIO SUBTITLE ANGLE « | [three times] MODE DISPLAY MENU MODE TITLE RETURN 2, 6 4, 7 2 PREV 4 REV ENTER 3 NEXT ¢ FWD DIMMER FL PLAY 1 3 ¡ 3, 5 2, 6 3, 5 DNR Virtual Dolby Surround VDD VDS OFF AUDIO D. R. C. ON OFF 2 2 Mode selection will be as shown below depending on the disc being used. Press Disc DVD Video CD CD once DNR DNR Virtual Dolby Surround twice three times four times Virtual Dolby Surround PAUSE MODE AUDIO D. R. C. Virtual Dolby Surround PAUSE STOP STEP 8 1 6 7 2 7 e 3 8 E 4 9 REPEAT DNR 5 0 +10 CLEAR PROGRAM CHP/TIME REPEAT A-B JOG MODE RANDOM LAST MEMO Changing picture quality of DVD's and Video CD's (DNR) This lets you select the ideal picture quality for watching regular movies, animation, and other video media. CONDITION C JOG & SHUTTLE R EV FW 1 2 During playback, press MODE to select "DNR". DNR OFF STANDARD MEM1 36 <VRB1205> Changing Picture and Sound Quality D Press direction buttons 2/3 to select desired "DNR" OFF Picture quality: When the picture is unclear depending on the contents of the software and the TV used, switch to the Standard mode. STANDARD Returns you to normal picture, quality, and display. MEMORY Picture quality: Picture quality can be adjusted as desired and then recorded. Changing Picture and Sound Quality 3 Select MEMORY where setting is to be memorized with 5/. MEM 1 MEM 2 TEMPORARY Changing the still picture condition of DVD's Effect FIELD: Picture quality: Picture shake will be eliminated during a paused picture. AUTO: Selects field or frame automatically according to disc. Preparation Preparation The desired picture quality can be memorized temporarily at TEMPORARY or permanently at MEMORY 1 or 2. 4 5 Press ENTER button. NR MIN MAX SHARP. MIN MAX BLACK LEVEL NORMAL DARK BLOCK FILTER OFF ON 1 2 During playback, press MODE to select "PAUSE MODE". Press direction buttons 2/3 to select desired pause mode. Basic Basic Operation Press direction buttons 5/ to select an item to be adjusted. NR MIN MAX SHARP. MIN MAX BLACK LEVEL NORMAL DARK BLOCK FILTER OFF ON Setup Setup NR Picture quality : Effective for luminance. SHARPNESS Picture quality : Adjusts picture's edge (outline) BLACK LEVEL Picture quality : Produces a modulated image with distinct blacks. BLOCK FILTER Picture quality : Effective for block noise characteristic to MPEG format. Detailed Operation 6 7 Adjust with direction buttons 2/3. NR MIN MAX SHARP. MIN MAX BLACK LEVEL NORMAL DARK BLOCK FILTER OFF ON Other Information memo Press ENTER button. Tips ¶ When left for 5 seconds, the display will change to the selected adjustment line only. This is convenient for making adjustment while viewing the picture. [. . . ] To establish a safe level: ÷ Start your volume control at a low setting. ÷ Slowly increase the sound until you can hear it comfortably and clearly, and without distortion. Once you have established a comfortable sound level: ÷ Set the dial and leave it there. Taking a minute to do this now will help to prevent hearing damage or loss in the future. [. . . ]