User manual PIONEER DVH-P5000MP

[. . . ] Also, rear displays should not be in a location where they are visibly distracting to the driver. In some countries or states the viewing of images on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed and this unit's DVD features should not be used. NEVER install the display in a location that enables the driver to watch the DVD or Video CD while driving. When you park your car in a safe place and apply the parking brake, the picture appears on the screen. These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. [. . . ] If you select another folder during repeat play, the repeat play range changes to ALL. If you perform track search or fast forward/reverse during TRACK, the repeat play range changes to FOLDER. When FOLDER is selected, it is not possible to play back a subfolder of that folder. After file or folder scanning is finished, normal playback of the files begins again. !You can also use A. MENU on the remote control to select an audio menu. To return to the previous display, press DISP/BACK/SCRL. To return to the main menu, press and hold DISP/BACK/SCRL. To return to the ordinary display, press BAND/ESC. When selecting FM as the source, you cannot switch to SLA. If you do not operate functions within about 30 seconds, the display automatically returns to the ordinary display. Using balance adjustment You can change the fader/balance setting so that it can provide the ideal listening environment in all occupied seats. 1 Use MULTI-CONTROL to select FAD/BAL in the audio function menu. En 31 Section 02 Operating this unit 2 Press MULTI-CONTROL to display the setting mode. 1 Compare the FM volume level with the level of the source you wish to adjust. 2 Use MULTI-CONTROL to select SLA in the audio function menu. 3 Press MULTI-CONTROL to display the setting mode. 4 Turn MULTI-CONTROL to adjust the source volume. +4 to ­4 is displayed as the source volume is increased or decreased. 5 Press MULTI-CONTROL to determine the selection. # Even if the menu has been canceled before determination, operation is settled. 02 Setting up the DVD player Introduction of DVD setup adjustments You can use this menu to change audio, subtitle, parental lock and other DVD settings. To perform this function, set the remote control to DVD mode. 1 Select DVD as the source and then press g. 3 Move the thumb pad left or right to switch the DVD setup menu categories. (general) 4 Move the thumb pad up or down to select the DVD setup function names. (subtitle language settings) --AUDIO LANG. [. . . ] 10 kHz Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±12 dB FM tuner Frequency range . . . . . . . . . . . . . . . . . . . . . . 87. 5 MHz to 108. 0 MHz Usable sensitivity . . . . . . . . . . . . . . . . . . . . . 9 dBf (0. 7 µV/75 W, mono, S/N: 30 dB) Signal-to-noise ratio . . . . . . . . . . . . . . . [. . . ]