User manual PIONEER DVR-520H

[. . . ] DVD Recorder DVR-520H DVR-720H Operating Instructions TM IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_En-A WARNING: The apparatus is not waterproofs, to prevent fire or shocks hazard, do not expose this apparatus to rain or moisture and do not put any water source near this apparatus, such as vase, flower pot, cosmetics container and medicine D3-4-2-1-3_En bottle etc. WARNING: BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY. [. . . ] This means that you can transfer back and forth without having to worry about the quality getting worse with each copy `generation'. It also means (As of April, 2004) DVD disc type Rec mode DVD-RW Ver. 8 mins. Note that all times in the above table are approximate. *1 *2 Compatible with single speed recording only Compatible with 2x speed recording *3 Compatible with 4x speed recording *4 Compatible with 8x speed recording. Note that actual copy speed varies with the part of the disc being recorded. 61 En 07 Copying and back-up Real-time copying Real-time copying is also possible, with the advantage that you can manually set a different recording mode from the original. For example, you can record a title originally recorded in FINE mode in SP mode. When real-time copying from the HDD to a Video mode DVD, the chapter markers in the original material are not copied. Chapter markers are put into the copy at intervals, according to the Auto Chapter (Video) setting (see also Auto Chapter (Video) on page 108). One Touch Copy* (HDD to DVD) The One Touch Copy feature copies the currently playing title (or currently selected title in the Disc Navigator) from the HDD to DVD. The whole title is copied, regardless of where in the title you start copying. The recorder copies at the maximum speed possible. For One Touch Copy to work, make sure that a recordable DVD-R/RW disc is loaded. * See also Copyright above. Frame accuracy and copying The Frame Accurate setting (see Frame Accurate on page 108) does not affect the actual video content on the HDD, but it does affect what can be copied and whether high-speed copying can be used. When Frame Accurate is set to Off, high-speed copying can generally be used to copy titles in the Copy List using a DVD-R or DVD-RW disc in VR or Video mode. However, copy-once protected material (see Restrictions on copying below) can't be added to the Copy List, and the divide points in edited titles may be out by as much as 0. 5 seconds when compared to the original. When Frame Accurate is On, you can add copy-once protected titles to the Copy List and divide points in edited titles are maintained accurately. However, depending on the content of the Copy List and the disc, it may not be possible to use high-speed copying. ONE TOUCH COPY HDD DVD · During HDD playback, press ONE TOUCH COPY to copy the current title to DVD. The front panel display indicates that the title is being copied. Note · Title name, chapter markers, as well as thumbnail picture markers (Navimark) for the Disc Navigator, are also copied. However, if you copy to a Video mode DVD-R/RW, only the first 32 characters of a name are copied. · The chapter markers in the copy may not be in exactly the same positions as the original when recording on to a Video mode disc. · You can't use the One Touch Copy function to copy a title if any part of the title is copy-once protected. · A title that contains mixed aspect ratios can't be copied to a Video mode disc. [. . . ] . AV connector 2 (Input 1), 4 pin mini DIN (Input 2) S-Video output . AV1 / Output Y (luminance) - Output level . 1 Vp-p (75 ) C (colour) - Output level . AV connector 1 (AV1), 4 pin mini DIN (Output) RGB input Input level . [. . . ]