User manual PIONEER DVR-530H-S

[. . . ] DVD Recorder DVR-630H-S DVR-530H-S Operating Instructions TM Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] The front panel display indicates that the title is being copied. · High-speed copying is used when copying from the HDD to DVD. · Real-time copying is used when copying from DVD to the HDD. Playback restarts from the beginning of the title. Restrictions on copying Some video material is copy-once protected. This means that it can be recorded to HDD, but it can't then be freely copied again. If you want to transfer copy-once protected material from HDD to DVD, you'll need to use a VR mode disc compatible with CPRM Ver. 1. 1 or higher (see CPRM on page 36 for more on this). Only one instance of a copyonce protected title can be added to the Copy List, and after it's been copied, the title is erased from the HDD (it is therefore not possible to copy a locked title that is copyonce protected). You can identify copy-once protected material during playback by displaying disc information on-screen. If the current title is copy-once protected, an exclamation mark ( !) is shown (see Play display 2 on page 34). 59 En 07 Copying and back-up Canceling One Touch Copy You can cancel a One Touch Copy once it's started. · Press and hold ONE TOUCH COPY for more than a second. Copying is canceled and the video already copied is erased. · If you cancel a HDD to DVD-R copy, the space available for recording does not return to the precopy figure. Using Copy Lists * See also Copyright on page 59. At its simplest, a Copy List is just a list of HDD or DVD titles that you want to copy. When copying HDD titles to DVD, you can, however, edit the titles in your copy list, erasing chapters you don't need, or re-naming titles, for example. Edits you make to titles in the Copy List do not affect the actual video content; only the `virtual' content of the Copy List. So you can freely erase and modify anything in your Copy List safe in the knowledge that the actual content is not being altered. Notes on copying using One Touch Copy Copying to DVD · Title name, chapter markers, as well as thumbnail picture markers for the Disc Navigator, are also copied. However, if you copy to a Video mode DVD-R/ RW, only the first 40 characters of a name are copied. · The chapter markers in the copy may not be in exactly the same positions as the original when recording on to a Video mode disc. · You can't use the One Touch Copy function to copy a title if any part of the title is copy-once protected. · A title that contains mixed aspect ratios can't be copied to a Video mode disc. [. . . ] 1­13 hours Input/Output VHF/UHF antenna input/output terminal . VHF/UHF set 75 (IEC connector) Video input . . Input 1, 3 (rear), 2 (front) Input level . Input 1, 3 (rear), 2 (front) Y (luminance) - Input level . [. . . ]