User manual PIONEER DVR-650H-S

[. . . ] HDD/DVD Recorder DVR-650H-S Operating Instructions Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] · DV recording only works when the DV camcorder is in VTR mode with a tape loaded. 64 En Playing and recording from a DV camcorder · There's a picture, but no sound! ENTER 07 5 Select `Record to Hard Disk Drive' or `Record to DVD'. The DV tape is rewound to the beginning. Once it is rewound, the DV tape is played from the beginning and copied to either the HDD or a DVD. · If there is a gap of two minutes or more between recorded contents, the copying process is automatically stopped. · Once copying is finished, the DV tape is automatically rewound. · To cancel the copying process, press STOP REC for more than three seconds. Try switching the DV Input setting (see DV Input on page 107) between Stereo 1 and Stereo 2. 1 About DV Using DV, also known as i. LINK or IEEE 13941995, you can connect a DV camcorder to this recorder using a DV cable for input of audio, video, data and control signals. "i. LINK" and the "i. LINK" logo are trademarks. · This recorder is only compatible with DVformat (DVC-SD) camcorders. Digital satellite receivers and Digital VHS video recorders are not compatible. · You cannot connect more than one DV camcorder at a time to this recorder. · You cannot control this recorder from external equipment connected via the DV IN jack. · It may not always be possible to control the connected camcorder via the DV IN jack. · DV camcorders can usually record audio as stereo 16-bit/48 kHz, or twin stereo tracks of 12-bit/32 kHz. This recorder can only record one stereo audio track. Set the DV Input setting as required (see DV Input on page 107). · Audio input to the DV IN jack should be 32 kHz or 48 kHz (not 44. 1 kHz). · Picture disturbance in the recording may occur if the source component pauses playback or plays an unrecorded section of tape, or if the power fails in the source component, or the DV cable is disconnected. · The DV IN jack is an input only. There is no output functionality. About automatic finalization If you use a DVD-R/-RW (Video mode) or DVD+R/+RW disc for copying, it will automatically be finalized after copying is complete. · You can't customize the background for DVD-R/-RW or DVD+R/+RW disc finalization. · If you want to give the disc a name, please do so before you start the copy (see Input Disc Name on page 99). · If a timer recording is scheduled to start, and in some other instances, the disc will not be finalized. [. . . ] Quartz lock (24-hour digital display) Tuner Receivable channels VHF . C1 ch to C125 ch 132 En Additional information Input/Output VHF/UHF antenna input/output terminal . VHF/UHF set 75 (F-shape connector) Video input. Input 1, 3 (rear), Input 2 (front) Input level . [. . . ]