User manual PIONEER DVR-S201

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D1-4-2-3_En IMPORTANT NOTICE ­ THE SERIAL NUMBER FOR THIS EQUIPMENT IS LOCATED IN THE REAR. PLEASE WRITE THIS SERIAL NUMBER ON YOUR ENCLOSED WARRANTY CARD AND D1-4-2-6-1_En KEEP IN A SECURE AREA. THIS IS FOR YOUR SECURITY. Information to User Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate D8-10-2_En the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] · To exit the Play Mode menu, press HOME MENU or PLAY MODE. Time Search (HDD, DVD): For example, for 25 minutes into the current title, press 2, 5, 0, 0. For 1 hour and 15 minutes and 20 seconds into the title, press 1, 1, 5, 2, 0. Time Search (Video CD): For example, for 2 minutes and 30 seconds into the current track, press 2, 3, 0. Title/Chapter/Folder/Track Search: For example, for track 6, press 6. 3 ENTER Search Mode ALL The Search Mode feature lets you start playback from a specified point in a disc by time1 or by title/chapter/folder/track number. Start playback. A-B Repeat ENTER 1 Select `Search mode' from the Play Mode menu, then choose a search option. The available search options depend on the type of disc. DVD HDD CD Video CD DivX The A-B Repeat function allows you to specify two points (A and B) within a track or title that form a loop which is played over and over. 2 ENTER 1 During playback, select `A-B Repeat' from the Play Mode menu. Note 1 When using time search, playback may occasionally start slightly before or after the time you input. 2 If you switch camera angles on a DVD during A-B repeat play, A-B repeat is canceled. 60 En Playback 06 ENTER 2 With `A (Loop Start)' highlighted, press at the point you want the loop to start. ENTER 1 Select `Repeat' from the Play Mode menu, then choose a repeat play mode. Play Mode Search Mode A-B Repeat Repeat Program Repeat Repeat Repeat Repeat Disc Title Chapter Off Play Mode Search Mode A-B Repeat Repeat Program A (Loop Start) B (Loop End) Off ENTER 3 With `B (Loop End)' highlighted, press at the point you want the loop to end. Playback immediately jumps back to the start point and plays the loop round and round. · To resume normal playback, select Repeat Off from the Repeat Play menu, or press CLEAR if no menu OSD (such as the Play Mode menu) is displayed. · When playing a DVD-Video/Video mode DVD, or from the HDD, the start and end points of the loop must be in the same title. · To resume normal playback, select Off from the A-B Repeat menu, or press CLEAR if no menu OSD (such as the Play Mode menu) is displayed. Program play HDD DVD-Video CD Video CD WMA/MP3 This feature lets you program the play order of titles/chapters2/folders/tracks on a disc or the HDD. ENTER Repeat play ALL There are various repeat play options, depending on the kind of disc loaded, or if you're using the HDD for playback. It's also possible to use repeat play together with program play to repeat the tracks/chapters in the program list (see Program play on page 61). 1 1 Select `Program' from the Play Mode menu, then `Input/Edit Program'. The Input/Edit Program screen varies according to the disc type. The audio channel(s) currently playing are indicated on-screen. HDD DVD (VR) DVD-RAM AUDIO When playing a DVD disc or DivX title recorded with two or more soundtracks (often in different languages), you can switch the soundtrack during playback. 1 Check the disc packaging for details of the soundtrack options. The current audio language is shown onscreen and in the front panel display. · The sound may drop out for a few seconds when switching soundtracks. · Some discs feature both Dolby Digital and DTS soundtracks. There is no analog audio output when DTS is selected. To listen to the DTS soundtrack, connect this recorder to a DTS decoder or AV AUDIO L+R ­ Both channels (default) L ­ Left/main channel only R ­ Right/SAP channel only CD Video CD WMA/MP3 Stereo ­ Stereo (default) 1/L ­ Left channel only 2/R ­ Right channel only Note 1 · Some discs only allow you to change audio language from the disc menu. · To set audio language preferences, see Audio Language on page 113. 2 Only when HDD Recording Format is set to Video Mode Off (HDD Recording Format on page 115). 3 When playing a dual mono recording on a VR mode disc, if you are listening to the Dolby Digital soundtrack via the digital output, you cannot switch the audio channel. Set Dolby Digital Out to Dolby Digital PCM (see Dolby Digital Out on page 112) or listen via the analog outputs if you need to switch the audio channel. 63 En 06 Playback Switching camera angles DVD-Video HDD and removable disc activity display Press DISPLAY once to see the HDD and removable disc (DVD, etc. ) activity. Use the HDD/DVD button to switch between the two kinds of display. [. . . ] Output 1, 2 Y (luminance) - Output level . . 4 pin mini DIN Component video output Output level. Y: 1. 0 Vp-p (75 ) PB, PR: 0. 7 Vp-p (75 ) Jacks . . Input 1, 3 (rear), 2 (front) L/R Input level During audio input. [. . . ]