User manual PIONEER EFX-1000

[. . . ] DJ EFFECTOR EFX-1000 Operating Instructions IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_En-A WARNING This equipment is not waterproof. [. . . ] When power is first turned on, defaults to [500 mSec]. 21 Beat effect beat-interval indicators The indicators light to show the period of the effect time. 22 Beat effect TIME/BPM dial When rotated the effect time selected with the beat select buttons can be changed as desired. If the dial is rotated while depressing the TAP button, the BPM can be set as desired (BPM manual input). 13 BPM measurement mode display (AUTO, MIDI, TAP). Displays the BPM measurement mode. 14 MIDI display Lights when handling MIDI data. 23 BPM MODE button / indicator Use to turn BPM mode ON, and to select tempo measurement mode (AUTO/MIDI/TAP). If the TAP button is pressed (tapped) during BPM mode, the mode switches to manual BPM measurement mode. When power is first turned, the mode defaults to AUTO measurement mode. 15 RHYTHM TAP display Displays the tap count input in the rhythm mode. 16 Beat effect select button / indicator (DELAY, ECHO, PITCH ECHO, TRANS, FLANGER, FILTER, PHASER). Use to select the beat effect. All buttons light, and selected effect button flashes. When power is turned ON, DELAY flashes. 24 TAP/SHIFT button / indicator [During BPM mode] When this button is tapped, the BPM manual measurement mode is selected, and the interval between two taps (maximum interval 2 seconds) is measured; the corresponding EFFECT TIME and BPM count is displayed, and the beat select button [1/1] is selected. If the TIME/BPM dial is rotated while pressing this button, the BPM can be adjusted to an optional value (BPM manual input). [During RHYTHM mode] When this button is tapped, the rhythm is input (maximum tap interval 2 seconds, up to maximum rhythm count 8). The beat select button [1/1] is selected. [Tap indicator] Lights during normal use; goes out only when TAP is pressed. 17 BEAT EFFECTS indicator Lights when beat effects are ON. 18 BEAT EFFECTS lever switch (OFF/ON/ON-LOCK) Pull the lever toward you [ON] to output beat-effected sounds. In the middle position beat effects are [OFF]; push the lever away from you to lock the lever in the [ON/LOCK] position (effects are locked ON). When pulled to the [ON] position, beat effects are output only while the lever is held; when your finger is released, the lever returns to middle [OFF] position. 19 EFFECT FREQUENCY select buttons (LOW/MID/HI) Use to select the frequency band of the sounds to which beat effects will be applied. The button of the selected band will light. When power is first turned ON, all three of the ranges LOW, MID, and HI are selected. If all three range buttons are OFF, no beat effects will be applied to sounds. 25 Rhythm REC button Clears the currently input rhythm and allows input of a new rhythm. 15 BEFORE USE (CONTROLS AND FUNCTIONS) 26 RHYTHM MODE button / indicator When this button is pressed, the RHYTHM mode is selected, and the button lights. 36 Jog memory LOOP play button / indicator If the button is pressed while the button indicator is lighted, the parameter change previously recorded in memory in response to the Jog dial movement is reproduced (played back repeatedly). Press again to end Jog memory loop play. Indicator lights when the jog operation is stored in memory. Indicator flashes during jog memory loop play (playback). 27 Beat effect DEPTH dial Allows adjustment of effect feedback and timing parameters in accordance with the amount of rotation (see page 13). 28 Beat effect CHARACTER dial Allows adjustment of parameters other than those set with the beat effect DEPTH dial (see page 13). 37 Jog HOLD button / indicator When this button is pressed so that its indicator lights, the effect produced when rotating the Jog dial is maintained even if you remove your hand from the dial (when the hold function is OFF, the effect returns to normal if your hand is removed from the dial). When power is first turned on, the button defaults to jog hold OFF (indicator is off). 29 Beat effect MIX dial Rotate to adjust the mixing balance of original and effect sounds. When rotated fully to the [ORIGINAL] side, the original (un-effected) sound will be output; as the dial is rotated toward the [EFFECT] side, the effect sound is amplified and the original sound decreases. 38 DIGITAL JOG BREAK effect lever switch (OFF/ON/ON-LOCK) Pull the lever toward you [ON] to output effected sounds. In the middle position effects are [OFF]; push the lever away from you to lock the lever in the [ON/LOCK] position (effects are locked ON). When pulled to the [ON] position, effects are output only while the lever is held; when your finger is released, the lever returns to middle [OFF] position. Digital Jog Break section 30 Digital jog break effect MIX dial Rotate to adjust the mixing balance of original and effect sounds. [. . . ] 1 NOTE: Specifications and design are subject to possible modification without notice. BLOCK DIAGRAM RY. ANALOG BYPASS LINE ANALOG INPUT DIGITAL BYPASS LINE ANALOG OUTPUT A/D BEAT EFFECT DIGITAL INPUT JOG BREAK EFX LINK DSP JOG BREAK D/A DIGITAL OUTPUT BEAT EFFECT SIGNAL FLOW CHANGE sw. 96 kHz 24-bit SYSTEM 96 kHz 24-bit SYSTEM 27 We Want You Listening For A Lifetime Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing damage from loud noise is often undetectable until it is too late, this manufacturer and the Electronic Industries Association's Consumer Electronics Group recommend you avoid prolonged exposure to excessive noise. This list of sound levels is included for your protection. [. . . ]