User manual PIONEER F-X10ZL

[. . . ] CAUTION This product is a class 1 laser product, but this product contains a laser diode higher than Class 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. refer all servicing to qualified personnel. The following caution label appears on your unit. [. . . ] When set to On, linear PCM audio signals of 96 kHz or greater are converted to 48 kHz. This makes loud sounds weaker and weak sounds louder. Change the setting for example when watching movies late at night. This setting only affects Dolby Digital sound. The effect depends on the vol ume of the connected TV, AV receiver or amplifier, speak ers, etc. Try different settings, and choose the one providing the strongest effect. The changed settings are stored in the memory. Notes The effect may be weak for some discs or files. These settings also affect the sound output from the DIGITAL AUDIO OUT COAXIAL terminals and the HDMI OUT terminal. Note that there is no effect when Dolby Digital, DTS or MPEG audio signals are being output. Change this setting if the sound of dialogs is low and the dialogs are hard to hear. No audio signals are output from the DIGITAL AUDIO OUT ter minal. When Digital Out is set to Off, the audio signals output from the HDMI OUT terminal are converted to linear PCM. Select this when the connected AV receiver or amplifier does not support Dolby Digital audio. Select this when the connected AV receiver or amplifier does not support DTS audio. When the connected AV receiver or amplifier does not support DTS audio, set Off. Select this when the connected AV receiver or amplifier does not support 96 kHz audio. Select this when the connected AV receiver or amplifier does not support MPEG audio. The factory default settings are indicated in italic. When the connected HDMIcompatible device is not compatible with Dolby Digital or MPEG audio, the signals are automatically converted to linear PCM audio signals for output. If the connected HDMIcompatible device is not compatible with DTS audio, the DTS audio signals are not output (the DTS audio signals are not converted to linear PCM signals for output). Options settings Settings 4:3 (Letter Box) 4:3 (Pan & Scan) TV Screen 16:9 (Wide) Select this to view 16:9 images on a 4:3 TV screen, with black bars at the top and bottom of the screen. [. . . ] Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited view ing uses only unless otherwise authorized by Macrovision Corporation. Unplug the power cord from the power outlet when cleaning the player. For tough dirt, apply some neutral detergent diluted in 5 to 6 parts water to a soft cloth, wring out thoroughly, wipe off the dirt, then wipe again with a soft, dry cloth. alcohol , thinner , benzene , insecticides , etc. [. . . ]