User manual PIONEER FH-P6200

[. . . ] Operation Manual Multi-CD control DSP High power CD Cassette player with FM/AM tuner English FH-P6200 Español \À Contents Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. Before You Start About this manual 4 Precautions 4 About the demo mode 4 Use and care of the remote control 4 Installing the batteries 4 Using the remote control 5 Resetting the microprocessor 5 Setting the display angle 5 Whats What Head unit 7 Remote control 8 Power ON/OFF Turning the unit on 9 Selecting a source 9 Turning the unit off 9 Tuner Listening to the radio 10 Introduction of advanced tuner operation 11 Storing and recalling broadcast frequencies 11 Tuning in strong signals 11 Storing the strongest broadcast frequencies 12 Cassette Player Playing a tape 13 Introduction of advanced cassette player operation 14 Repeating play 15 Skipping blank tape sections 15 Using Dolby noise reduction 15 Built-in CD Player Playing a CD 16 Introduction of advanced built-in CD player operation 17 Repeating play 17 Playing tracks in a random order 18 Scanning tracks of a CD 18 Pausing CD playback 18 Using disc title functions 19 Entering disc titles 19 Displaying disc titles 19 Using CD TEXT functions 20 Displaying titles on CD TEXT discs 20 Scrolling titles in the display 20 Multi-CD Player Playing a CD 21 50-disc multi-CD player 21 Introduction of advanced multi-CD player operation 22 Repeating play 22 Playing tracks in a random order 22 Scanning CDs and tracks 23 Pausing CD playback 23 Using ITS playlists 23 Creating a playlist with ITS programming 23 Playback from your ITS playlist 24 Erasing a track from your ITS playlist 24 Erasing a CD from your ITS playlist 25 Using disc title functions 25 Entering disc titles 25 Displaying disc titles 26 Selecting discs from the disc title list 26 Using CD TEXT functions 26 Displaying titles on CD TEXT discs 26 2 En Contents English Scrolling titles in the display 26 Using compression and bass emphasis 27 Audio Adjustments Introduction of audio adjustments 28 Using balance adjustment 28 Adjusting loudness 29 Using subwoofer output 29 Adjusting subwoofer (low pass filter) settings 29 Adjusting low pass filter attenuation slope 29 Using the high pass filter 30 Adjusting high pass filter attenuation slope 30 Using non fading output 30 Adjusting non fading output level 30 Adjusting source levels 31 Digital Signal Processor Using the digital signal processor 32 Using sound field control and BBE sound 32 Recalling sound field programs 33 Adjusting BBE sound level 33 Using the graphic equalizer 33 Recalling equalizer curves 33 Adjusting equalizer curves 34 Adjusting 9-band graphic equalizer 34 Using the position selector 34 Using automatic sound levelizer 35 Initial Settings Adjusting initial settings 36 Setting the clock 36 Setting the FM tuning step 36 Setting the AM tuning step 37 Switching the auxiliary setting 37 Switching the dimmer setting 37 Switching the RCA output setting 37 Selecting the digital attenuator 38 Adjusting display contrast 38 Switching the telephone muting/ attenuation 38 Other Functions Turning the clock display on or off 39 Switching the display color 39 Adjusting the display color 39 Using different entertainment displays 39 Using the AUX source 39 Selecting AUX as the source 40 Setting the AUX title 40 Additional Information Understanding built-in CD player error messages 41 Cassette tapes 41 Cleaning the playback head 41 Music search and repeat functions during tape playback 41 CD player and care 42 CD-R/CD-RW discs 42 Specifications 43 En 3 Section 01 Before You Start About this manual This unit features a number of sophisticated functions ensuring superior reception and operation. All the functions have been designed for the easiest possible use, but many are not self-explanatory. This operation manual will help you benefit fully from this products potential and to maximize your listening enjoyment. [. . . ] Press DISPLAY repeatedly to switch between the following settings: Play timeDISC TITLE (disc title)D. ARTIST (disc artist name)TRK TITLE (track title) T. ARTIST (track artist name) # If specific information has not been recorded on a CD TEXT disc, NO XXXX will be displayed (e. g. , NO TA-NAME). Scrolling titles in the display This unit can display the first 10 letters only of DISC TITLE, D. ARTIST, TRK TITLE and T. ARTIST. When the recorded information is longer than 10 letters, you can scroll the text to the left so that the rest of the title can be seen. % Press DISPLAY and hold until the title begins to scroll to the left. The rest of the title will appear in the display. Selecting discs from the disc title list Disc title list lets you see the list of disc titles that have been entered into the multi-CD player and select one of them to playback. Press FUNCTION until TITLE LIST appears in the display. 2 Press c or d to scroll through the list of titles that have been entered. # If no title has been entered for a disc, NO TITLE will be displayed. 3 Press a to play your favorite CD title. That selection will begin to play. 26 En Section Multi-CD Player 07 Using compression and bass emphasis You can use these functions only with a multiCD player that supports them. Using COMP (compression) and DBE (dynamic bass emphasis) functions let you adjust the sound playback quality of the multi-CD player. Each of the functions have a two-step adjustment. The COMP function balances the output of louder and softer sounds at higher volumes. DBE boosts bass levels to give playback a fuller sound. Listen to each of the effects as you select through them and use the one that best enhances the playback of the track or CD that you are listening to. Press FUNCTION until COMP appears in the display. English # If the multi-CD player does not support COMP/DBE, NO COMP is displayed when you attempt to select it. 2 Press a or b to select your favorite setting. Press a or b repeatedly to switch between the following settings: COMP OFFCOMP 1COMP 2 COMP OFFDBE 1DBE 2 En 27 Section 08 Audio Adjustments Introduction of audio adjustments 1 2 # To return to the display of each source, press BAND. Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. Using balance adjustment 3 1 SW indicator Shows when the subwoofer output is turned on. 2 LOUD indicator Appears in the display when loudness is turned on. 3 Audio display Shows the audio adjustments status. % Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FADER (balance adjustment)LOUD (loudness)SUB. W (subwoofer)80Hz (subwoofer setting)SLP (subwoofer slope)F-HPF (front high pass filter)R-HPF (rear high pass filter) You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. Press AUDIO until FADER appears in the display. # If the balance setting has been previously adjusted, BAL will be displayed. 2 Press a or b to adjust front/rear speaker balance. Each press of a or b moves the front/rear speaker balance towards the front or the rear. FADER :F25 FADER :R25 is displayed as the front/rear speaker balance moves from front to rear. # FADER : 0 is the proper setting when only two speakers are used. # When the RCA output setting is RCA :NON, SUB. W, 80Hz and SLP change to NonFAD (non fading) function. [. . . ] 30 15, 000 Hz (±3 dB) Stereo separation . . . . . . . . . . . . . . . . . . . . 45 dB (at 65 dBf, 1 kHz) FM tuner AM tuner Frequency range . . . . . . . . . . . . . . . . . . . . . . 531 1, 602 kHz (9 kHz) 530 1, 640 kHz (10 kHz) Usable sensitivity . . . . . . . . . . . . . . . . . . . . . 18 µV (S/N: 20 dB) Signal-to-noise ratio . . . . . . . . . . . . . . . [. . . ]