User manual PIONEER GEX-P20HD

[. . . ] USER PREFERENCE 4. 1 Language screen 4. 2 Bnner timing screen 4. 3 Parental control screen 4. 4 PIN code access 4. 5 PIN code change screen 5. SETUP 5. 1 System setting 5. 2 Channel installation 5. 2. 1 Full reinstallation program screen 5. 2. 2 Channel installation success 5. 2. 3 Channel installation failed 5. 3 TV configuration 5. 4 Time setting 5. 5 Reinstallation 6. SUBSCRIPTION SETTING 6. 1 CA system Enquiry screen 7. SYSTEM INFORMATION 7. 1 Maintenance and care 7. 2 Caution 7. 3 Troubles shooting 8. [. . . ] This mode is a user-guided mode in order to help the user to easily perform configuration and installation. In this mode, some screens are automatically presented to the user until a complete installation is successfully achieved: Welcome screen, TV format, Channels installation, Antenna adjustment (only if the automatic search fails), End of first time installation. This mode remains active until the user has reached the last screen. For example, if the user turns off the STB (Set Top Box) while the first time installation mode, when the STB (Set Top Box) is restarted, the first time installation mode restarts also from the beginning. 2. 1. 2 Countr y setup This screen is displayed 3 seconds only when powering on the STB (Set Top Box) the first time (first time installation). An opening screen is displayed (country setup). Key Action LEFT/ RIGHT To chose the different TV format setting between the 4:3 (letterbox) and 16:9 aspect ratio towards the (left/right) direction. Figur e9: ­ countr y setup 2. 1. 3 Language This screen is displayed only when powering on the STB (Set Top Box) the first time (first time installation). It consists of the language setting between (English, Fr ench, Dutch, , Italy, Swedish, Spanish, Russia, Ger man. 17 2. 1. 4 TV for mat This screen is displayed only when powering on the STB (Set Top Box) the first time (first time installation). It consists of the TV format setting between the 4:3 (letterbox) and 16:9 aspect ratio. Predefined values The underlined value is the default one. 1 Manually Press left or right key to set the desired TV format Select `4. 3' in the letter box or `16. 9' Press ok button to proceed to the next command of the installation procedure 2 Automatically -Once the TV format the equipment searches through the entire reception range of program that can be receive. -Only available when DVB-T signal is available -The channel search and number of channel located is shown on the screen -Once completed its search, the equipment tunes in to the first program on the automatically generated list. -If channel fails to locate any channel, a message will be shown. Go to the main menu And select favorites list Figure 14: Favor ite lists scr een Figur e 15: Create a pr ogr am list screen -The default name given to each favorite list is "FAV1 to FAV4" -Use the keys to choose the type of channel (TV/Radio) -Press the OK button to switch to the `Modify a favorites list' menu and add more channels 3. 5 Modify pr ogr am list Figure16: Modify option scr een This screen allows modifying a favorite list. The current favorite list name is displayed on the top of the screen. All the services matching the criteria selected at the creation of the favorite list are listed. The services not skipped are proposed on the top of the list. Each favorite list has its own service numbering. The user can switch from a list to another one (favorite and default) by pressing the PRF key but the screen is different depending on the list is a default one or a favorite one. In case of a favorite list, the user can lock or unlock a service, skip or add some services or all services. He can also sort the services either by alphabetical order either manually. If the list is the default TV and Radio lists, only the `lock/unlock' option is available. 21 Figure 17: Modify a favor ite list screen Figur e 18: Modify a favor ite list scr een confir mation Use PRF+/PRF- ( buttons used for activating the favorite list)to select the list created Mark the channel that you wish to edit by using the keys Select the function by using the appropriate color. Use the menu/exit to exit the menu or pess the OK button to save and exit RED GREEN YELLOW BLUE Go to the "Lock/Unlock a program" screen. If the list is a favorite Go to the "Skip/Add a program" screen. [. . . ] The edit box is below the text item and is managed by the CA System plug-in after the user has press OK. Figur e 66: Conditional Access system scr een Select the purchased option and the purchased item screen will be displayed (Information will be displayed according to the CA card used) Figure 67: Pur chased item scr een Selecting the credit option and the credit item screen will be displayed (Information will be displayed according to the CA card used) Figure 68: Credit scr een 38 Selecting the language option and the language screen will be displayed (Information will be displayed according to the CA card used) Select the language wanted by pressing the ok button Figure 69: language scr een Selecting the CA system information option and the CA system information screen will be displayed (Information will be displayed according to the CA card used) Figure 70:CA system infor mation screen 39 7. SYSTEM INFORMATION Figure 71: System Infor mation option scr een This screen gives to the user some information about the STB (Driver Version, Software Version and hardware Version). (The version shown on the screen may be different from the actual one) Figure 72: System infor mation screen 7. 1 Maintenance and care Batteries need to be charge. -Open the batteries compartment on the back of remote -Remove batteries -Insert 2 new types AAA ACC -Check the polarities -Close compartment 40 7. 2 Caution Do not recharge, disassemble, heat or dispose of the battery in fire If you want to dispose this product, do not mix it with general household waste. there is a separate collection system for used electronic product in accordance with legislation that requires proper treatment, recovery and recycling Private household in the 25 member states of the EU, In Switzerland and Norway may return their used electronic product fee of charge to designated collection facilities or to a retailer (if you purchase a similar new one). [. . . ]