User manual PIONEER GEX-P5700TVP

[. . . ] Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this manual in a safe place for future reference. Precautions IMPORTANT SAFEGUARDS 3 To ensure safe driving 3 To avoid battery exhaustion 4 Before You Start About this unit 5 Video system of a connected component 5 About this manual 5 In case of trouble 5 Resetting the microprocessor 5 Switching the operation mode 6 Use and care of the remote control 6 Installing the battery 6 Using the remote control 7 Whats What Remote control 8 Other remote controls 8 When using a Pioneer car DVD players remote control 9 When using a Pioneer car DVD players remote control 9 TV tuner (SRC mode) Whats What 10 Head unit (e. [. . . ] This unit features three operation modes: SRC : OSD OFF mode, SRC : OSD ON mode and STAND ALONE mode. Using with a Pioneer head unit featuring an IP-BUS input. Not using this units OSD (On Screen Display) indications in the display. Keep the battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. Remove the battery if the remote control is not used for a month or longer. Do not recharge, disassemble, heat or dispose of the battery in fire. Do not handle the battery with metallic tools. Do not store the battery with metallic materials. In the event of battery leakage, wipe the remote control completely clean and install a new battery. When disposing of used batteries, please comply with governmental regulations or environmental public institutions rules that apply in your country/area. Do not let the remote control fall onto the floor, where it may become jammed under the brake or accelerator pedal. STAND ALONE mode Press to display the area group setting screen (Selecting the area group on page 16). 5 POWER button SRC : OSD ON mode Press to turn the rear display on or off when the TV is not selected as a source. SRC : OSD OFF mode Press to turn the rear display on or off when the TV is not selected as a source. This units supplied remote control is mainly for use by rear seat passengers. when using , point at the remote control sensor. 1 CH CALL button SRC : OSD ON mode When the TV is selected as a source, or, when the rear TV is on and the TV is not selected as a source: Channel information is displayed on the front and rear display. SRC : OSD OFF mode When the TV is selected as a source, or, when the rear TV is on and the TV is not selected as a source: Channel information is displayed on the rear display. STAND ALONE mode Press to display the current channel and other settings (Confirming current channel and other settings on page 17). 2 BAND button SRC : OSD ON mode Not used. Alternatively, use BAND on the head unit. [. . . ] # You can also perform seek tuning by pressing and holding c or d button. If you touch any of the preset tuning keys P1P12 you can easily store up to 12 broadcast stations for later recall with the touch of a key. % When you find a station that you want to store in memory, keep touching one of preset tuning keys P1P12 until the preset number stops flashing. The number you have touched will flash in the preset number indicator and then remain lit. [. . . ]