User manual PIONEER GEX-P900DAB-02 annexe 1

[. . . ] When using a Head Unit other than this, refer to "Operating with Different Head Units" on page 5. Always keep the volume low enough for outside sounds to be audible. If the battery is disconnected, the preset memory will be erased and must be reprogrammed. Should this product fail to operate properly, contact your dealer or nearest authorized Pioneer Service Station. [. . . ] For this reason, when multiple frequencies are receivable, a different frequency is automatically received in each band. When Ensemble is received and Service selection is possible, you can change the display as follows: Each press changes the Display . Each press of the DISPLAY button changes the display in the following order: PTY Label = Service Component Label = Ensemble Label = Dynamic Label = PTY Label = . With a Service Component that has no Service Component Label or Dynamic Label, switching to Service Component Label and Dynamic Label is not possible. With displays other than PTY Label, if you do not perform an operation within 8 seconds or press a button other than the DISPLAY button, the display returns to PTY Label indications. With a Service Component that has no Service Component Label, switching to Service Component Label is not possible. With a Service Component that has no Service Component Label, switching to Service Component Label is not possible. With displays other than Service Label, if you do not perform an operation within 8 seconds or press a button other than the Function button/1, the display returns to Service Label indications. You can switch between 16 and 8 letters display of PTY Label, Service Component Label and Ensemble Label indications. The display changes each time you press the button for 2 seconds or more. Head Unit Groups 2 and 3 Head Units do not have this function. Press a button from 1­6 for 2 seconds or more to store a desired Service. If the preset Service is in the Ensemble you are currently listening to, that Service is recalled. If the preset Service is not in the current Ensemble, the correct Ensemble is first tuned in, and then the preset Service is recalled. If the Service has ended when preset is performed, the unit switches to Standby for that Ensemble. Search for a Service Component of the set language in the recalled Service is performed. Each press of the FUNCTION button selects the mode in the following order: Language Filter (Language) = Announcement Support (Announce S) = Service Follow (SF) = Service Component (Primary/2)* = Dynamic Label** * You cannot switch to this mode with a Service that has just one Service Component. **You cannot switch to this mode with a Service Component that has no Dynamic Label. After entering the Function menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically canceled. This unit does not feature FUNC4 and AUTO function capability. When you select another Ensemble or Service, or perform PTY Search, you can set the unit to give priority to Service Components broadcast in a desired language. setting for up to 6 languages is possible. [. . . ] With a Service Component that has no Dynamic Label, Dynamic Label information is not displayed. If you press the 5 button when scrolling, you return to the first line. If you select the Dynamic Label mode again after having canceled it, the information may switch to the latest available. Search begins in order from the next Service after the currently selected Service. [. . . ]