User manual PIONEER GEX-P920XM

[. . . ] Before You Start Before You Start Operation Manual XM satellite digital tuner Precautions Information to User Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment. Important (Serial Number) The serial number of this device is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card. After-sales service for Pioneer products Please contact the dealer or distributor from where you purchased the product for its after-sales service (including warranty conditions) or any other information. In case the necessary information is not available, please contact the companies listed below: Please do not ship your product to the companies at the addresses listed below for repair without making advance contact. Box 1760 Long Beach, CA 90801-1760 800-421-1404 For warranty information, please see the Limited Warranty sheet included with your product. About the XM Logo GEX-P920XM About this manual About this unit This unit features a number of sophisticated functions ensuring superior reception and operation. [. . . ] Operate according to the instructions in this operation manual. DEH-P9600MP DEH-P960MP DEH-P7600MP DEH-P760MP DEH-P7500MP DEH-P750MP DEH-P670MP DEH-P6600 DEH-P660 DEH-P6500 DEH-P650 DEH-P560MP DEH-P5500MP DEH-P550MP DVH-P5000MP DEH-P4700MP DEH-P470MP DEH-P4600MP DEH-P460MP DEH-P4500MP DEH-P450MP DEH-P3700MP DEH-P3600 DEH-P360 DEH-P3500 DEH-P350 DEH-P2600 DEH-P26 DEH-P2500 DEH-P250 DEH-P25 FH-P5000MP Select Head unit group 4 When using "GEX-P920XM" with "FH-P4200MP", operate while referring to the head unit group 4 function compatibility chart. Note "FH-P4200MP" controls this unit as an external unit. Note When using this unit with "FH-P4200MP", press FUNCTION to display the following function: FUNC 1 (Switching the display)--FUNC 2 (Switching the channel select mode)--FUNC 3 (No function)--FUNC 4 (No function)--Auto (No function). En En En En XM tuner XM tuner XM tuner XM tuner Power supply for this unit When the head unit's power supply is OFF, this unit is also OFF. (Selecting a source other than XM tuner will not turn this product off. ) This unit's power supply can be turned OFF if the ignition switch is turned OFF. If for any reason you want to switch the power of the unit OFF, switch the vehicle's ignition off (turn the ACC of your vehicle to OFF). Selecting the XM source 1 Press SOURCE to turn the head unit on. 2 Press SOURCE to select "XM" source. Press SOURCE repeatedly to switch between the following sources: XM tuner--Tuner--Television--DVD player/Multi-DVD player--Built-in CD player--Multi-CD player--External unit 1--External unit 2--AUX Note To quit listening to the XM tuner, press SOURCE to switch to another source or press SOURCE and hold until the head unit turns off. Listening to XM 1 Press SOURCE to select a XM source. 2 Press BAND to select a band. Press BAND until the desired band is displayed, XM1, XM2 or XM3. 3 Press or to select the desired channel. The channel number moves up or down successively. Channels that cannot currently be selected are skipped, and the next channel is selected. These are the basic steps necessary to operate the XM. XM channel select setting indicator Shows what channel select setting has been selected. CH. No is displayed when CH NUMBER is selected, and CAT is displayed when CATEGORY is selected. XM channel number indicator Shows which XM channel number the tuner is tuned to. XM band indicator Shows the XM band which has been selected. XM preset number indicator Shows what XM preset has been selected. XM channel name Shows the channel name of broadcast channel. If you press and hold or , you can increase or decrease channel number continuously. You can also select a channel from a desired channel category. (Refer to "Switching the channel select mode". ) Storing and recalling channels If you press any of the preset tuning buttons 1­6 you can easily store up to six channels for later recall with the touch of a button. · Memory and recall are for broadcasts. If you recall a memorized broadcast that has been moved to another channel, the channel to which the broadcast was moved is selected. When you find a channel that you want to store in memory, press one of the preset tuning buttons 1­6 and hold until the preset number stops flashing. [. . . ] Action Check whether the XM antenna cable is attached securely. Make sure that there is nothing unusual with the antenna or antenna cable. Wait until the encryption code is fully updated. Channels 000 and 001 should function normally. [. . . ]