User manual PIONEER HTP-FS500

[. . . ] RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, etc. [. . . ] Other problems when using the Auto MCACC Setup If the room environment is not optimal for the Auto MCACC Setup (too much background noise, echo off the walls, obstacles blocking the speakers from the microphone) the final settings may be incorrect. check for household appliances (air conditioner , fridge , fan , etc. ), that may be affecting the environment and switch them off if necessary. If there are any instructions showing in the front panel display, please follow them. Some older TVs may interfere with the operation of the microphone. If this seems to be happening, switch off the TV when doing the Auto MCACC Setup. Note 1 The subwoofer distance setting may be farther than the actual distance from the listening position. This setting should be accurate (taking delay and room characteristics into account) and generally does not need to be changed. On this system, it is possible to switch the input signals for the different inputs as described below. When DIGITAL (C1/O1/O2) or HDMI (H) is selected and the selected audio input is not provided, A (analog) is automatically selected. Each press cycles through the following: · For other inputs, HDMI cannot be selected. 2 When set to DIGITAL or HDMI, 2 lights when a Dolby Digital signal is input, and DTS lights when a DTS signal is input. When the HDMI is selected, the A and DIGITAL indicators are off (see page 38). note 1 · This system can only play back Dolby Digital, PCM (32 kHz to 96 kHz) and DTS (including DTS 96 kHz / 24 bit) digital signal formats. You may get digital noise when a LD or CD player compatible with DTS is playing an analog signal. To prevent noise, make the proper digital connections (page 27) and set the signal input to C1/O1/O2 (DIGITAL). Some DVD players don't output DTS signals. For more details, refer to the instruction manual supplied with your DVD player. 2 When the HDMI option in Setting the Audio options on page 63 is set to THRU, the sound will be heard through your TV, not from this system. This system has a dedicated iPod terminal that will allow you to control playback of audio content from your iPod using the controls of this system. The front panel display shows Loading while the system verifies the connection and retrieves data from the iPod. 3 Use the TOP MENU button to display iPod Top menu. [. . . ] If this doesn't seem to work, try resetting your iPod. IPod/USB Error 1 There is a problem with the signal path from the iPod to the system. IPod/USB Error 2 The software version being used with the Update the software being used with the iPod needs to be updated. IPod (please use the latest iPod software (I/U ERR2) versions later than the iPod updater 200410-20). [. . . ]