User manual PIONEER HTP-SL050

[. . . ] However the method of connecting and operating the unit is the same. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] In case of "STEREO" indicator does not turn on because broadcast signal is too weak, sound is monaural automatically. MONO: Lights when the monaural mode is set using the MPX MODE button. TUNED: Lights when broadcasts are being received. STEREO: Lights when stereo broadcasts are received during auto stereo mode. Use to switch the function setting of this unit. When operating other devices, press any one of these buttons to specify the device to be operated. This button cannot be used to switch the functions of this unit. Press to operate this unit when set to the TUNER. 25) To preset other brand devices, press any one of the MULTI CONTROL function buttons together with this button. -, +, buttons [CD, TAPE, DVD, LD, VCR, MD operations] STANDBY/ON, 4, ¢ (Chapter / Track search), 2 (Play), 1 (Rewind), ¡ (Fast Forward), 8(Pause), 7(Stop), 3(Play) Number/Surround setting buttons TEST TONE: When turned ON (while in DOLBY PRO LOGIC), volume balance adjustment signals are out put in order from the speakers and can adjusted. LOUDNESS button When LOUDNESS is turned ON at a small volume, the low frequency and high frequency levels increase, enabling the sound to be easier to hear. ¶ When 3 STEREO is selected in the center mode, the delay time cannot be set. Selecting broadcast stations (For example, when selecting an FM broadcast) Over 2 second, then release) Stop when received or pressed again 7 Selecting a broadcast station using the main unit 2 The TUNED indicator will not light when a broadcast station is too far away or when the broadcasting signal is weak. Press the numbers of the frequency to be received in order. The selection will be memorized in the specified station number 5 seconds later. Pressing the MEMORY button within 5 seconds will exit the MEMORY mode. Can also be called with the number button (Before operating, press the TUNER button of the remote control unit. 7 Operating with the main unit 1 ¶ When the power button is off for several week, the stations memorized will be erased. By turning ON the power and setting TUNER, the station set before the power was turned OFF will be received 7 Operating with the main unit 1 ¶ ¶ ¶ The signal from VCR cannot be recorded. The volume, tone, balance, and surround setting of this unit have no effect during recording signal. The remote control unit can be used to operate your PIONEER products and other manufacturers audio/ video equipment (VCR, TV, LD player, CD player, etc. Perform the following procedure to enable operation of other manufacturers equipment. [. . . ] simulates the acoustic effects of a middle concert hall. Suitable for vocal music and light classical music. Simulates the acoustic effect of discos with a square dance Floor. Features strong bass sound, for the listener to enjoy the "fever" of disco sounds. [. . . ]