User manual PIONEER KEH-P2030R

[. . . ] Multi-CD control High power Cassette player with RDS tuner Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. Before You Start About this unit 3 About this manual 3 Precautions 3 In case of trouble 3 Protecting your unit from theft 3 Removing the front panel 3 Attaching the front panel 4 Whats What Head unit 5 Power ON/OFF Turning the unit on 7 Selecting a source 7 Turning the unit off 7 Tuner Listening to the radio 8 Storing and recalling broadcast frequencies 8 Tuning in strong signals 9 Storing the strongest broadcast frequencies 9 RDS Introduction of RDS operation 10 Switching the RDS display 10 Receiving PTY alarm broadcasts 10 Selecting alternative frequencies 10 Using PI Seek 11 Using Auto PI Seek for preset stations 11 Limiting stations to regional programming 11 Receiving traffic announcements 11 Responding to the TP alarm 12 PTY list 12 Cassette Player Playing a tape 13 Radio intercept 13 Multi-CD Player Playing a CD 14 Changing the display 14 Repeating play 14 Pausing CD playback 15 50-disc multi-CD player 15 Audio Adjustments Introduction of audio adjustments 16 Using balance adjustment 16 Using the BTB (bass treble booster) 16 Adjusting BTB 17 Adjusting loudness 17 Adjusting source levels 17 Initial Settings Adjusting initial settings 18 Setting the FM tuning step 18 Switching Auto PI Seek 18 Additional Information Cassette player 19 Cassette tapes 19 Cleaning the playback head 19 Specifications 20 This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC). [. . . ] Press DISP/REG repeatedly to switch between the following settings: Program service namePTY information Frequency PTY (program type ID code) information is listed on page 12. This inaudible information provides such features as program service name, program type, traffic announcement standby and automatic tuning, intended to aid radio listeners in finding and tuning in to a desired station. RDS functions like AF and TA are only active when your radio is tuned to a RDS station. When the station stops broadcasting the emergency announcement, the system returns to the previous source. An emergency announcement can be cancelled by pressing TA/AF. If you are listening to a broadcast and the reception becomes weak or there are other problems, the unit will automatically search for a different station in the same network which is broadcasting a stronger signal. 1 Press TA/AF and hold until the AF turns on. 2 Press TA/AF and hold until the AF turns off. When you tune in a RDS station its program service name is displayed. If you want to know the frequency you can. Only RDS stations are tuned in during seek tuning or BSM when AF is on. When you recall a preset station, the tuner may update the preset station with a new frequency from the stations AF list. (This is only available when using presets on the F1 band. ) No preset number appears on the display if the RDS data for the station received differs from that for the originally stored station. Sound may be temporarily interrupted by another program during a AF frequency search. AF can be turned on or off independently for each FM band. % Press DISP/REG and hold until the regional function turns on or off. Regional programming and regional networks are organized differently depending on the country (i. , they may change according to the hour, state or broadcast area). The preset number may disappear on the display if the tuner tunes in a regional station which differs from the originally set station. The regional function can be turned on or off independently for each FM band. If the unit fails to find a suitable alternative frequency, or if you are listening to a broadcast and the reception becomes weak, the unit will automatically search for a different station with the same programming. [. . . ] Initial settings lets you perform initial set up of different settings for this unit. 1 Press SOURCE and hold until the unit turns off. 2 Press AUDIO and hold until STEP appears in the display. Press AUDIO repeatedly to switch between the following settings: STEP (FM tuning step)A-PI (Auto PI Seek) Use the following instructions to operate each particular setting. [. . . ]