User manual PIONEER KEH-P6600RS

[. . . ] Multi-CD control High power cassette player with RDS tuner This product complies with the EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC). The tuner frequencies on this product are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. Use in other areas may result in improper reception. The RDS function operates only in areas with FM stations broadcasting RDS signals. [. . . ] When a magazine is loaded into a 50-Disc type multi-CD player, information on all the discs in the magazine is read. If you start playing a disc on a 50-Disc type multi-CD player before reading of information on all discs has been completed, reading of information stops part way through. This will prevent you from using a number of functions. (If you try and use these functions, "NOT READY" is displayed. ) If this happens, reading of information begins again when you switch to a component other than 50-Disc type multi-CD player. It is possible to connect up to three multi-CD players by means of a multiple installation adapter. When two or more multi-CD players are installed, their priorities must be specified. Follow the multi-CD player instructions carefully, and set the address switches properly. You can select discs directly with the 1 to 6 buttons. Just press the number corresponding to the disc you want to listen to. When a 12-Disc Multi-CD Player is connected and you want to select disc 7 to 12, press the 1 to 6 buttons for 2 seconds or longer. This handy function lets you select discs loaded in a 50-Disc Multi-CD Player using the 1 to 5 buttons. The 50 discs are divided into five blocks, with each of the 1 to 5 buttons assigned to a block. For example, if you press button 1, discs 10 through 19 are searched in order, and then the disc with the lowest disc number is selected. Rough search of discs 1 to 9 is not possible. Press the appropriate button from 1 to 5 to select the block containing the desired disc. In this menu you can select Multi-CD Player functions. Each press of the FUNCTION button selects the mode in the following order: REPEAT = TITLE LIST = ABC SEARCH* = RANDOM = SCAN = ITS-P = MG-P* = FREQ-P* = PAUSE = COMP * ABC SEARCH, MG-P and FREQ-P are 50-Disc type multi-CD player functions. You cannot switch to these modes when using 6-Disc and 12-Disc type multi-CD players. With multi-CD players that do not feature COMP (Compression) and DBE (Dynamic Bass Emphasis) functions, "NO COMP" is displayed if you switch to the COMP mode. ⷠAfter entering the Function Menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically canceled. In this menu you can perform Disc Title Input, and ITS Program and PGM button settings. [. . . ] Compare the FM volume with the volume of the other source. Repeat the preceding operation to return to previous volume. If the (+) or (­) button is used to cancel the Attenuator mode, the sound will resume at a lower volume than before. The front panel of the main body is detachable to discourage theft. [. . . ]