User manual PIONEER KEX-P820RDS

[. . . ] this product's display features Key Guidance Indicators. These light to indicate which of the 5//2/3, FUNCTION and AUDIO buttons you can use. When you're in the Function Menu or Audio Adjustment Menu, they also make it easy to see which 5//2/3 buttons you can use to switch functions ON/OFF, switch repeat selections, and perform other operations. When "ON" and "OFF" are lit, you can switch the currently selected function ON/OFF with the 5/ buttons. [. . . ] The Tape function can only be turned ON/OFF with the cassette tape remaining in this product. While "F-MS" is displayed, the system winds the cassette tape forward to the beginning of the next song, then play begins from that point. Fast Forward (FF) and Forward-Music Search (F-MS) can be canceled by pressing the BAND button during FF or F-MS operation. While "REW" is displayed, the system rewinds the cassette tape to the beginning of the current side. While "R-MS" is displayed, the system rewinds the cassette tape to the beginning of the current song, then play begins from that point. Rewind (REW) and Rewind-Music Search (R-MS) can be canceled by pressing the BAND button during the REW or R-MS operation. In this menu you can select Tape functions. Each press of the FUNCTION button selects the mode in the following order: REPEAT = B-SKIP = RI = NR To cancel the Function Menu, press the BAND button. After entering the Function Menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically canceled. Switch the Dolby B NR on when listening to a cassette recorded with Dolby B NR. Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. You cannot switch to this mode when using 6-Disc and 12-Disc type multi-CD players. You can cancel the Detailed Setting Menu by pressing the FUNCTION button again for 2 seconds or more. COMP (compression) and DBE (dynamic bass emphasis) functions are available to adjust the sound quality of your multi-CD player. Each can be adjusted in two levels, but they cannot be used together. COMP and DBE can also be used with another multi-CD player which is equipped with these functions. If it is not so equipped, "NO COMP" is displayed when COMP/DBE switching is attempted. The COMP (compression) function eliminates distortions caused by imbalances between loud and subdued sounds at higher volumes. Multi-CD players offer four repeat modes: One-track Repeat, Disc Repeat, Multi-CD player Repeat and All Repeat. Multi-CD player Repeat is the default mode (normal play) when one or more multi-CD players is installed. Select the desired repeat mode in the following order: All Repeat is available only when two or more multi-CD players are installed. When a different disc or multi-CD player is selected, the mode switches to the Multi-CD player Repeat mode. [. . . ] Function is deactivated, the rear speakers output sound on all frequencies, not only bass sounds. Function ON, adjust the front and rear speakers volumes selecting the FAD mode in the Audio Menu for better balanced listening. The SLA function prevents radical leaps in volume when switching between sources. Settings are based on the FM volume, which remains unchanged. [. . . ]