User manual PIONEER KP-717G

[. . . ] , on the power cord , or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. [. . . ] If the screen in step 7 is left untouched for 10 seconds and the ENTER button is not pressed in step 8, the Auto MCACC setup will start automatically as shown below. A progress report is displayed on-screen while the system outputs more test tones to determine the optimum system settings for channel level, speaker distance, and Acoustic Calibration EQ. For correct speaker settings, do not adjust the volume during the test tones. Note 1 MIC IN blinks when the microphone is not connected to MCACC SETUP MIC. Procedures for listening to audio from a radio or connected other component. Again, try to be as quiet as possible while this is happening. Be sure to disconnect the microphone from this unit upon completion of the Auto MCACC setup. The settings made in the Auto MCACC Setup should give you excellent surround sound from your system, but it is also possible to adjust these settings manually using the System Setup menu (starting on page 66). 2 Press SYSTEM to turn on the power of this system. 4 Start playback of the component you selected in step 1. Other problems when using the Auto MCACC Setup If the room environment is not optimal for the Auto MCACC Setup (too much background noise, echo off the walls, obstacles blocking the speakers from the microphone) the final settings may be incorrect. 2 · If after pressing iPod the display shows NO DEVICE, try switching off the system and reconnecting the iPod to the system. To navigate songs on your iPod, you can take advantage of the OSD of your TV connected to this system. 3 You can also control all operations for music in the front panel display of this system. Finding what you want to play When your iPod is connected to this system, you can browse songs stored on your iPod by playlist, artist, album name, song name, genre or composer, similar to using your iPod directly. To return to the previous level any time, press RETURN. This system is compatible with the audio and the video of the iPod nano, iPod fifth generation, iPod classic, iPod touch and iPhone (iPod shuffle not supported). However, that some of the functions may be restricted for some models. Note, however, compatibility may vary depending on the software version of your iPod and iPhone. Please be sure to use the latest available software version. Features such as the equalizer cannot be controlled using this system, and we recommend switching the equalizer off before connecting. Pioneer cannot under any circumstances accept responsibility for any direct or indirect loss arising from any inconvenience or loss of recorded material resulting from the iPod failure. [. . . ] If your display only has one HDMI terminal, you can only receive HDMI video from the connected component. Depending on the component, audio output may be limited to the number of channels available from the connected display unit (for example audio output is reduced to 2 channels for a monitor with stereo audio limitations). If you want to switch the input source, you'll have to switch functions on both the system and your display unit. Since the sound is muted on the display when using the HDMI connection, you must adjust the volume on the display every time you switch input sources. [. . . ]