User manual PIONEER KRL-46V

[. . . ] Failure to do so could cause unforeseen accidents such as the equipment breaking or falling over (see page 15). While adjusting its angle forward and backward, be extremely careful to keep your hands out of the space between the bottom of the Pioneer display and television and the stand (see page 14). Prevent accidents caused by the product falling over, by taking reliable measures to prevent it from falling over (see page 16). [. . . ] Do not install on a table smaller than the stand. Keep unused small parts out of reach of children to prevent Caution ingestion by mistake. Gently wipe the glossy surface of the stand with the wiping cloth provided with the Pioneer display and television. Whendoingthis, donottakeoffyourhandfromthesupport column until it is fixed firmly. Secure the support column to the stand with the Installation screws 1 (4 locations on the left and right). Using a Phillips screwdriver, first loosely attach the top attachment screw, then loosely attach the bottom attachment screw. The weight of a Pioneer display and television is about31. Fix the screws with a Phillips screwdriver. Fit the stand's support columns to the bottom of the Pioneer display and television as indicated by the arrows, then slowly insert them vertically. Be sure to observe the following precautions when moving or installing this product with a Pioneer display and television into a TV table or other enclosure. Make sure that you always secure a space at least as large as that shown in the following diagram in front of and behind the table top stand. Whenmovingtheproductmorethanafew meters, firstremovethespeaker, thenremove Caution the Pioneer display and television from the stand andmovethespeaker, stand, Pioneerdisplayand television separately. Precautions when installing in a TV table or other enclosure Wheninstallingin a TV table or other Caution enclosure, holdthe Pioneer display and television by the handles located on the rear of the Pioneer display and television. if you hold thespeakers , theymaybe damaged or twisted. Hold the Pioneer display and television by its handles and from the top. TVtable, itcould Caution cause unforeseen accidents such as the equipment breaking or falling over. Be very careful not to apply force to the bases of the cables on the Pioneer display and television side. After installing the stand, be sure to take special care to ensure that the Pioneer display and television will not fall over. [. . . ] Fix the Pioneer display and television to a TV table using the fall-prevention straps as in the diagram. Using a wall for stabilization ThePioneerdisplayandtelevisionbeingquiteheavy, aTV tablethatissturdyenoughtosupportit, andwithsufficient width and depth to ensure that it does not fall over should always be used. Thewireendsmay cause electric shock and fire if they get inside the Pioneer display and television through the ventilation holes. [. . . ]