User manual PIONEER MEP-7000 annexe 1

[. . . ] The Pioneer website listed above provides answers to frequently asked questions, information about software, and other up-to-date data of assistance to our customers. Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. [. . . ] rotate while holding the PITCH BEND (+/­) button depressed (super fast pitch bend). While holding the button depressed, rotate the jog dial in the direction you wish to modify the speed; the speed will change faster than during normal pitch bend. While holding the button depressed, rotate the jog dial in the direction you wish to perform the track skip operation, and high-speed track skip will be performed in proportion to the amount the jog dial is turned. When moved toward the front (+), the tempo becomes faster, and when moved away from you toward the rear (­), the tempo becomes slower. The tempo of the piece can be changed even while maintaining the same musical pitch; see "APPLYING A MASTER TEMPO". By setting a cue point in memory, you can set the track to cue standby instantly merely by pressing the CUE button. 1 During playback, press the play/pause () button and pause playback around the point you wish to set as cue point. Rotating the jog dial one rotation moves playback 75 frames, while pressing SEARCH button once moves the playback one-frame in the designated direction. Press the PITCH BEND (+) button to increase the playback speed, and press the (­) button to slow the playback speed. Each time the button is pressed, the variable range of the TEMPO adjust slider changes (±6 %/±10 %/±16 %/WIDE). When set to a variable range of ±6 %, the tempo changes in increments of 0. When set to ±10 % and ±16 %, the tempo changes in increments of 0. When set to WIDE, the tempo can be changed in increments of 0. The tempo range setting is preserved in memory even when power is turned OFF. Rotate the jog dial slowly and return the play to the point just before the place you wish to begin playback (if the jog mode is something other than SCRATCH, the cue point will be the point immediately after the sound heard in audible pause). Once the frame number or audible sound is at the desired cue point, press the CUE button. The sound will be muted, and the CUE button indicator will light, indicating successful setting of the cue point. When a new cue point is set in memory, any previously set cue point will be cleared from memory. During playback, press the IN/CUE button at the point you wish to mark as a cue point. This point will be recorded as a new cue point. The button indicator (MT) will light; when the TEMPO adjust slider is used to adjust the speed (tempo), the pitch of the music will remain unchanged. The unit will return to the set cue point and enter cue standby mode. [. . . ] However, if the file size exceeds 308 000 bytes, those tracks in the portion exceeding 308 000 bytes cannot be displayed. When browsing using a database you have constructed, m3u files will not be displayed. In the case of discs, those recorded with short file names are not supported. mIX In "normal style" operation , DJ software tracks cannot be mixed. [. . . ]