User manual PIONEER MVH-150UI

[. . . ] ователя Italiano Español Deutsch Nederlands Русский Section 01 Before you start Before you start Thank you for purchasing this PIONEER product To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the manual in a safe and accessible place for future reference. About this unit The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the Middle East, Africa and Oceania. [. . . ] The repeat play range varies depending on the Bluetooth audio player in use. Playing tracks in random order to turn random play on or off. The random play range varies depending on the Bluetooth audio player in use. For details, refer to Enhancing compressed audio and restoring rich sound (sound retriever) on this page. 10 En Section Operating this unit Operating this unit 02 3 Turn M. Once selected, the following audio functions can be adjusted. For details, refer to SP-P/O MODE (rear output and preout setting) on the next page. W CTRL and HPF SETTING are not available when REAR/REAR is selected in SP-P/O MODE. For details, refer to SP-P/O MODE (rear output and preout setting) on the next page. W CTRL and HPF SETTING are not available when SUB. POWERFUL—NATURAL—VOCAL—CUSTOM1—CUSTOM2—FLAT—SUPER BASS The equalizer band and equalizer level can be customized when CUSTOM1 or CUSTOM2 is selected. CUSTOM1 can be set separately for each source. However, USB and iPod are all set to the same setting automatically. CUSTOM2 is a shared setting used in common for all sources. To cycle between the following: Equalizer band—Equalizer level 5 Turn M. 5KHZ—8KHZ Equalizer level: +6 to –6 LOUDNESS (loudness) Loudness compensates for deficiencies in the lowfrequency and high-frequency ranges at low volume. W (subwoofer on/off setting) This unit is equipped with a subwoofer output which can be turned on or off. W CTRL (subwoofer adjustment) Only frequencies lower than those in the selected range are outputted from the subwoofer. To cycle between the following: Cut-off frequency—Output level—Slope level Rates that can be adjusted will flash. HPF SETTING (high pass filter adjustment) When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. To cycle between the following: Cut-off frequency—Slope level 3 Turn M. [. . . ] 3 USB storage device Playback sequence is the same as recorded sequence in the USB storage device. To specify the playback sequence, the following method is recommended. 1 Create a file name that includes numbers that specify the playback sequence (e. 3 Save the folder containing files on the USB storage device. [. . . ]