User manual PIONEER MVH-S300BT

[. . . ] English DIGITAL MEDIA RECEIVER RÉCEPTEUR MÉDIA NUMÉRIQUE RECEPTOR DE MEDIOS DIGITALES Français Español MVH-S300BT MVH-S301BT Owner’s Manual Mode d’emploi Manual de instrucciones Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card. 18 19 20 22 22 About this manual: • In the following instructions, a USB memory or USB audio player are referred to as “USB device”. € When an iPhone is connected to the unit, the source name on the unit appears as [iPod]. [. . . ] Pause/resume playback Thumbs Up (Only for radio) Thumbs Down (Only for radio) Random play (Only for track/album/ artist/playlist) Repeat play (Only for track/album/ artist/playlist) Start a radio channel based on the song currently being played. Making a connection with Pioneer ARC APP 1 Press and hold 5/ to start a radio. € This function may not be available depending on the selected song. 1 2 3 4 5 Connect this unit with the mobile device. Dial to select one of the below, then press to confirm. NOTE When the connection setting is changed, a message that lets you know that the connection setting had been changed will appear in the display. Dial NOTE Some functions of Spotify may not be operated from the unit. Using Pioneer ARC APP You can operate the unit from Pioneer ARC APP installed on an iPhone/ Android device. In some cases, you can control aspects of the application, such as source selection, pause, etc. The unit turns off automatically and the setting is executed. Purpose Fast forward or reverse Pause/resume playback Operation Press and hold Press 4/PAUSE. When [IPHONE] is selected in step 5 • Select [WIRED] for the USB connection. • Select [BLUETOOTH] for the Bluetooth connection. When [ANDROID] is selected in step 5 • Select [APP CONTROL] for the USB connection. • Select [BLUETOOTH] for the Bluetooth connection. When you select the USB connection, Pioneer ARC APP on the Android device starts automatically if [ON] is selected in [P. NOTE If Pioneer ARC APP has not been installed on your Android device yet, a message that prompts you to install the application will appear on your Android device. Audio Adjustments You can also make various adjustments in the AUDIO settings (page 19). Adjusting the cut-off frequency value and the slope value You can adjust the cut-off frequency value and the slope value of each speaker. [FRONT], [REAR], [SUBWOOFER] NOTE [SUBWOOFER] can only be selected when [ON] is selected in [SUBWOOFER] (page 19). NOTE When you connect a mobile device other than iPhone/Android device, select [OTHERS] in the [PHONE CONNECT] menu and select [WIRED] (for the USB connection) or [BLUETOOTH] (for the Bluetooth connection). Depending on your mobile device, it may not operate correctly. [. . . ] fLAC Copyright © 2000-2009 Josh Coalson Copyright © 2011-2014 Xiph. Org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: – Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. € Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. Org Foundation nor the names of its The user cannot assign folder numbers and specify playback sequences with this unit. [. . . ]