User manual PIONEER N-30-K

[. . . ] Use in other areas may result in poor reception. The RDS (radio data system) function only works in areas that broadcast RDS signals for FM stations. Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards. [. . . ] SPEANA (spectrum analyzer) Setting up for Bluetooth audio Before you can use the Bluetooth audio function you must set up the unit for use with your Bluetooth audio player. You will need to pair this unit with your Bluetooth audio player. 10 En <QRD3242-A>10 Black plate (11, 1) Section Using this unit Using this unit 02 Operations using special buttons Selecting a repeat play range to select a repeat play range from 1 Press 6/ one or all. This function may not be available depending on the type of Bluetooth audio player connected. The repeat play range varies depending on the Bluetooth audio player in use. Playing tracks in random order to turn random play on or off. The random play range varies depending on the Bluetooth audio player in use. Rtrv to cycle between: 1—2—OFF (off) 1 is effective for low compression rates, and 2 is effective for high compression rates. For details, refer to Enhancing compressed audio and restoring rich sound (sound retriever) on page 11. Once selected, the following audio functions can be adjusted. FADER is not available when SW is selected in REAR-SP. AUX (auxiliary input) Activate this setting when using an auxiliary device connected to this unit. You can also change the dimmer setting by pressing and holding /DIMMER. BRIGHTNESS (brightness adjustment) You can use this setting to adjust the display brightness. The range of settings available for BRIGHTNESS will vary depending on whether DIMMER is on or off. DIMMER on: 1 to 4 DIMMER off: 1 to 5 BT AUDIO (Bluetooth audio activation) You need to activate the BT AUDIO source in order to use a Bluetooth audio player. PW SAVE (power saving) Switching this function on enables you to reduce the consumption of battery power. Turning on the source is the only operation allowed when this function is on. BT MEM CLEAR (clearing the Bluetooth device data stored on this unit) System menu Important PW SAVE (power saving) is canceled if the vehicle battery is disconnected and will need to be turned back on once the battery is reconnected. When PW SAVE (power saving) is off, depending on connection methods, the unit may continue to draw power from the battery if your vehicle’s ignition doesn’t have an ACC (accessory) position. Bluetooth device data stored on this unit can be cleared. To protect your personal information, clear the device memory before you pass the unit on to someone else. [. . . ] Users of iPod with the Lightning Connector should use the Lightning to USB Cable (supplied with iPod). Users of iPod with the Dock Connector should use CD-IU51. About the file/format compatibility, refer to the iPod manuals. Audiobook, Podcast: Compatible Level 1 Level 2 Level 3 Level 4 : Folder : Compressed audio file 01 to 05: Folder number 1 to 6: Playback sequence :Ы D: Display C: Character Bluetooth profiles In order to use Bluetooth wireless technology, devices must be able to interpret certain profiles. [. . . ]