User manual PIONEER PD-10-S

[. . . ] PD-30_PWSYXZT8. book 1 ページ ２０１２年５月７日　月曜日　午前１１時３３分 Operating Instructions | Mode d’emploi | Bedienungsanleitung | Istruzioni per I’uso | Handleiding | Manual de instrucciones | Инструкции по эксплуатации Super Audio CD Player | Lecteur Super Audio CD | Super Audio CD-Spieler | Lettore CD Super Audio | Super-Audio CD-speler | Reproductor de Super Audio CD | PD-30_PWSYXZT8. book 2 ページ ２０１２年５月７日　月曜日　午前１１時３３分 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. . WARNING This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. D3-4-2-1-3_A1_En IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). [. . . ] For details, see Additional information on page 12. • Pioneer does not guarantee that any file recorded on a USB storage device will play or that power will be supplied to a USB storage device. Also note that Pioneer will accept no responsibility whatsoever for loss of files on USB storage devices caused by connection to this unit. • This unit does not support use of a USB hub. 3 • To pause playback, press the  button. • To stop playback, press the  button. Press the  button to begin playback. 10 En PD-30_PWSYXZT8. book 11 ページ ２０１２年５月７日　月曜日　午前１１時３３分 Using advanced functions Chapter 5: 05 English Using advanced functions The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot be used. See Playback functions on the right column. Playback functions The functions that can be used differ according to the type of disc and file. In some cases, some of the functions cannot be used. Check the usable functions on the table below. SACD/CD 1 Press the SACD/CD button. Disc/file type Function1 SACD CD-DA CD-R/-RW2        –  – WMA MP3 AAC3   –   –   5 – Input changes to SACD/CD. Français 2 In the stop mode, press the SACD/CD button. Each time the button is pressed, the playback alternates between the CD area and SACD 2 channel area. Note • This unit does not support SACD multi-channel areas. DSD4   – Playing with high-fidelity sound Sound Retriever When compressed sound signals are decompressed for playback, some parts experience dropouts. By setting the sound retriever function to ON, compensation is added for those losses, thus producing richer, more sumptuous sound. Fast forward/Fast reverse Skip function Direct search (designate a specific track for playback) Repeat playback Random playback        –  6 Deutsch   –  • Press the S. RETRIEVER button. S. RETRIEVER Adjusting overall display illumination This unit is equipped with a dimmer function to allow the display illumination to be adjusted in three levels, responding to differing levels of ambient lighting. The factory default is the brightest setting. Programmed playback (Play tracks in a predetermined order) View disc data Sound Retriever Pure Audio SACD/CD Each time the button is pressed, the function will change as follows: S. RTRV: OFF  S. RTRV: LOW  S. RTRV: HI  Returns to original status • The sound retriever function is disabled when the pure audio function is ON. Italiano –  – • Press the DIMMER button. DIMMER Pure Audio This function disables digital audio output and plays analog audio with high fidelity. When set to ON, the display shows no indicators. The factory default condition is OFF. Each time the button is pressed it the brightness cycles through the three levels. • The dimmer setting cannot be changed when a disc is playing with the pure audio function ON (see at left). • The brightness of the STANDBY indicator does not change. • Press the PURE AUDIO button. PURE AUDIO 1 Some functions may not work for some discs or files, even if indicated [] on the table. 2 Also see Playback of CD-R/CD-RW discs on page 12. 3 • AAC files can be played back only on the PD-30. • Also see Playable file formats on page 12. 4 Also see Playing DSD discs on page 12. 5 This function is enabled only during playback of files recorded on disc. 6 Hybrid SACD discs only. Nederlands Press again to turn the function OFF. [. . . ] 5 % to 85 % (no condensation) Note • Specifications and the design are subject to possible modifications without notice, due to improvements. • Corporation and product names mentioned herein are trademarks or registered trademarks of the respective corporations. Français Deutsch Audio output (1 stereo pair) Output level. During audio output 200 mVrms (1 kHz, –20 dB) Number of channels . RCA Italiano Digital audio characteristics Frequency response CD. [. . . ]