User manual PIONEER PD-F100

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. IMPORTANT SAFETY INSTRUCTIONS READ INSTRUCTIONS -- All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS -- The safety and operating instructions should be retained for future reference. HEED WARNINGS -- All warnings on the product and in the operating instructions should be adhered to. [. . . ] UNLOAD: The slot corresponding to the disc No. being displayed rotates to the center position then the hood is opened. · Do not attempt to open the hood with your hand. · Be careful not to pinch your fingers when opening and closing the hood. · If PLAY operation (PLAY, BEST, Hi-LITE, PREVIOUS) is carried out before disc detection finishes, PLAY operation will proceeded to without detection. In this case, detection will operate after PLAY is finished. Detection may not function properly depending on the color or shape etc. , of the disc. BEFORE OPERATING (Carry out step 3 within 5 seconds. ) WARNING: Do not put your hand or any other object inside the rack, otherwise injury or part damage may result. SEC 3 UNLOAD Press UNLOAD. « DISC TRACK MIN BASIC OPERATIONS CDFILE 301­D ISC The hood will open. When UNLOAD is pressed, the hood opens to the disc corresponding to the disc No. displayed on the front of the unit. 4 Load the disc into the rack with the label side (printed surface) facing to the right. Label side faces right. (Side to be played faces left. ) Note!!:Only discs stored in the CUSTOM file are played back (see pages 12 to create a custom file). 3 ALL 3 SINGLE In stop mode: CUSTOM 2 3 ALL 3 SINGLE During playback: To pause play Press 6 (or 8). To start playback again, press 6. · When you select SINGLE during playback, only the current disc will be played. · If you press MODE during program mode, the program contents will be erased. · When you turn the power ON, playback starts according to the last selected play mode. · If you did not select a play mode, playback starts in ALL. · SINGLE is selected automatically when playing the disc loaded in the Single Loader slot. <Last disc memory> When you press 7 or turn the power OFF, the unit memorizes the disc that was being played. The next time you press 6, playback will start from that same disc. (This feature is available except in the PROGRAM play, BEST play, PREVIOUS scan, HI-LITE scan and RANDOM play modes. ) To skip to another track Tap 41/¡¢ (or 4/¢ on the remote control unit). To fast forward/reverse. Hold-down 41/¡¢ (or 1/¡ on the remote control unit). 10 BASIC OPERATIONS 2 1 2 3 Jog dial 1 2 3 DISPLAY DISC PUSH ENTER 4 5 6 4 5 6 7 8 9 ENTER RANDOM 7 8 9 DISC DISC MODE CLEAR PROGRAM REPEAT DISPLAY 0 TRACK 0 TRACK 1 STANDBY FILE­TYPE CD MECHANISM STANDBY/ON Î SINGLE LOADER OPEN/ CLOSE ACCESS PLAY UNLOAD 6 7 41/¡¢ 7 6 ­ DISC + 1 ¡ 4 ¢ DISC(­/+) 4/¢ 3 7 7 8 3 RANDOM 3 OPEN/CLOSE Single Loader slot Playing a disc that is not loaded in the rack Use the single loader slot to play discs that are not loaded in the rack. To start playback from a specific disc DISC PUSH ENTER 1 SINGLE ACCESS Press SINGLE LOADER ACCESS. · The hood will open with the single loader slot located in the front of the unit. In the player pause, turn the jog dial to select the disc number. During pause, press 6 or ENTER ( 3 on the remote control unit) after choosing the disc. (To perform this operation from the remote control unit, use the DISC (­/ +) buttons to select the disc number. ) · Playback starts from the first track of the chosen disc. BEFORE OPERATING 2 BASIC OPERATIONS Loading the disc into the Single Loader slot with the label side (printed surface) facing to the right. Label side faces right (Side to be played faces left) Opening or closing the hood during playback VARIOUS OPERATIONS 3 To open the hood during playback LOADER PLAY Press SINGLE LOADER PLAY. The play mode is set to SINGLE. OPEN/ CLOSE Press the OPEN/CLOSE button and hold it in for about 2 seconds. Tips: · The disc in the single loader slot can also be selected with the jog dial. Use the jog dial to select the spot after disc number 300 and before disc number 0 (where "P0" is displayed). [. . . ] This manufacturer and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion-and, most importantly, without affecting your sensitive hearing. Over time your hearing "comfort level" adapts to higher volumes of sound. So what sounds "normal" can actually be loud and harmful to your hearing. [. . . ]