User manual PIONEER PD-F1009

[. . . ] The serial number for this equipment is located on the rear panel. Please write this serial number on your enclosed warranty card and keep it in a secure area. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. READ INSTRUCTIONS -- All the safety and operating instructions should be read before the product is operated. [. . . ] Load only one disc into each disc slot. ) disc adapter alone, without attaching it to a disc. The unit will not operate if the hood is opened during playback. Be sure to close the hood before attempting any operation. To load or remove a disc in or from the slot which is seen through the hood, press OPEN/CLOSE. The hood is opened, "HOLD" is displayed and the disc can be loaded in or ejected from the slot seen through the hood. Even while "HOLD" is being displayed, the rack can be rotated by pressing DISC (­/+). 2 Select the number of the disc you want to unload Load other discs into the rack by repeating steps 4 and 5 for each of them. The rack rotates until the selected disc comes to the front of the unit. To listen in order from the first track Use the digit buttons to select the disc, then press DISC. Use the digit buttons to select the track, and press TRACK. The tracks are played in order starting from the first track on the disc with the lowest disc No. If you choose a play mode beforehand, the tracks/discs are played back according to the respective play mode. tips: · If you play a CD TEXT disc, the title of the disc being played are shown on the display. During CD TEXT disc playback, the display can be changed by pressing DISPLAY. Press a few times to choose the mode you desire. :Only discs stored in the CUSTOM file are played back (see pages 12 to create a custom file). When you select SINGLE during playback, only the current disc will be played. If you press MODE during program mode, the program contents will be erased. When you turn the power ON, playback starts according to the last selected play mode. If you did not select a play mode, playback starts in ALL. <Last disc memory> When you press 7 or turn the power OFF, the unit memorizes the disc that was being played. [. . . ] Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement. [. . . ]