User manual PIONEER PD-F607

[. . . ] However, the method of connecting and operating the unit is the same. The line voltage selector switch is located on the rear panel of this player. Check that it is set properly before plugging the power cord into the outlet. If the voltage is not properly set or if you move to an area where the voltage requirements differ, adjust the selector switch as follows: CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. [. . . ] Please make sure to only pull out one disc tray at a time. (When a disc tray has been pulled out, do not pull out other disc trays. ) ÷ If discs are inserted label side upward, it will not be possible for them to be played. Please make sure to insert them with the label side downward. Objects other than discs (song cards, explanations of disc contents, etc. ), must never be inserted into the disc trays. Do not touch the playing surface of discs (iridescent side) with hands or fingers. Before making or changing the connections, switch off the STANDBY/ON switch and disconnect the power cord from the AC outlet. Make sure that the white plugs are connected to the left (L) jacks and the red plugs to the right (R) jacks. Be sure not to connect this unit to the amplifier's PHONO jacks, as sound will be distorted and normal playback will not be possible. Connect the power cord to a household AC wall outlet or an AC outlet on your amplifier. Thus, when the power is next turned on, pressing the 6 button starts playback from the first track on the memorized disc. Press the EJECT button (0), remove the magazine, and then press the STANDBY/ON switch to turn off the power. Even when the power is turned off (in standby mode), the magazine will be ejected by pressing the EJECT button. When inserting a magazine into the player, make sure that the direction of insertion is correct. Do not place in locations subject to high temperatures or exposed to direct sunlight. Be careful not to drop, or hit magazines against things. Also do not apply strong force to trays which have been withdrawn. Application of benzene, thinner, insecticide or other volatile liquids to a magazine may damage the surface, so keep magazines away from such substances. Operations indicated the [ ] mark are performed with the remote control unit. The timer will supply power to both the amplifier and the player at the preset time, turning all the components on and initiating the playback mode. Playback starts from the first track on the first disc. [. . . ] NOTE: When a track is selected with the 4 1 or ¡ ¢ button in step 3, the displayed track number is automatically programmed if the 4 1 or ¡ ¢ button is not pressed within 2 seconds. Therefore, be sure to press the 4 1 or ¡ ¢ button sequentially until the desired track number appears on the display. Track number 33 or above cannot be deleted. To go to the previous or next disc/track other than the deleted disc/track, press the 4 1 or ¡ ¢ button. [. . . ]