User manual PIONEER PD-M427

[. . . ] Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. [. . . ] Operate the player with the remote control unit by aiming it at the amplifier. Be sure to connect both of the control cord's plugs securely to the CONTROL IN and CONTROL OUT terminals. Do not connect only one end of the cable. Be sure to turn off the power of the amplifier before connecting the power cord and output cord. Connect the power cord to a household AC wall outlet or an AC outlet on your amplifier. Make sure plugs are inserted fully into the jacks and wall outlet. When a Pioneer stereo amplifier bearing the Î mark is used, connect the CONTROL IN jack on the rear panel of the CD player to the CONTROL OUT jack of the amplifier. This will enable the CD player to be controlled using the remote control unit supplied with the stereo amplifier. If you do not plan to use this feature, it is not necessary to connect CONTROL IN/ OUT jacks. Be sure to use the supplied control cable. The remote control unit supplied with the amplifier can be used to control Play, Stop, Pause, Track/Disc Search and Disc Change operations. Some functions cannot be carried out depending on the connection of AC power cord. Function When the AC power cord is connected to the switched outlet of an amplifier or audio timer Yes No No When the AC power cord is connected to the unswitched outlet of an amplifier or wall outlet No Yes Yes Timer playback Program memory Delete program memory For details, refer to the description of each function in these Operating Instructions. If "no DISC" appears on the display, you have pressed the disc number of a tray which does not contain a disc. During program playback, Disc Search cannot be carried out. While the ¡ ¢ button is kept pressed, playback rapidly advances toward the end of the disc. When playback reaches the end of the disc, the player enters pause mode and "END" is displayed. While the 4 1 button is kept pressed, playback rapidly reverses toward the beginning of the disc. When the desired passage is reached, release the ¡ ¢ button or 4 1 button. The player enters original mode (playback or pause) where ¡ ¢ button or 4 1 button is released. During normal playback, Manual Search can be carried out on one disc only. During program playback, Manual Search can be carried out in one program step only. [. . . ] If the magazine is in the player, the delete program contents will not be erased even if the power is turned off. NOTE: After programming for Program playback or during Program playback mode, Delete programming can not be carried out. C Press the CLEAR button on the remote control unit during stop mode or play mode. When the CLEAR button is pressed during Delete program playback mode, the player enters normal playback mode. [. . . ]