User manual PIONEER PDP-4270XD

[. . . ] Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. The wires in this mains lead are coloured in accordance with the following code: Green and Yellow : Earth Blue : Neutral Brown : Live If the plug provided is unsuitable for your socket outlets, the plug must be cut off and a suitable plug fitted. The cut-off plug should be disposed of and must not be inserted into any 13 amp socket as this can result in electric shock. The plug or adaptor or the distribution panel should be provided with 13 A fuse. [. . . ] Neither "Standard" nor "ADV" is selectable when 576p, 720p@50 Hz, or 1080p@24 Hz signals are input. To perform adjustment for another item, press RETURN, and then repeat steps 6 and 7. You may press / to immediately change an item to be adjusted. Closer to magenta Closer to red Closer to yellow Closer to green Closer to cyan Closer to blue Closer to yellow Closer to green Closer to cyan Closer to blue Closer to magenta Closer to red Eliminates video noise for clean crisp images. Eliminates mosquito noise from video images when a digital TV channel is watched or a DVD is played, resulting in noise-free images. This works for both video and still images. Emphasizes the contrast on images so that the difference between brightness and darkness becomes more distinct. This works for both video and still images. Emphasizes dark portion on images so that the difference between brightness and darkness becomes more distinct. For the 3DYC, the individual parameters are selectable only when: ­ You have selected INPUT 1, 2, or 3 as the input source and "Video" as the input signal type (see page 45); or ­ You have selected INPUT 4 as the input source and have not connected a S-Video cable; or You have selected the analogue tuner. For the I-P Mode, the individual parameters are not selectable for the following input signals: 480p, 720p@60 Hz, 576p, 720p@50 Hz, 1080p@24 Hz. This shifts the apparent direction of the sound upward for more clearly defined sound. You can adjust the sound quality to your preference with the following settings. Adjust the sound to your preference for the chosen AV Selection option. You cannot set up the sound field for listening with headphones. If you set up the sound field with headphones connected, the new setting will become effective as soon as you disconnect the headphones. This provides three-dimensional sound effects and/or deep, rich bass. Provides deep, rich bass using a new technology. You cannot adjust the sound for listening with headphones. If you perform sound adjustments with headphones connected, the new settings will become effective as soon as you disconnect the headphones. To restore the factory defaults for all items, press / to select "Reset" in step 3, and then press ENTER. You cannot adjust the front surround effect for listening with headphones. [. . . ] Restore the screen display, press any button other than i + /i ­ or e. Sound is output from only a single speaker. Has the correct screen size been selected?Strange colour, light colour, dark · The picture may look dark in a room that is too bright. [. . . ]