User manual PIONEER PDP-4270XD,MV

[. . . ] Book Page 1 Friday, June 16, 2006 5:32 PM PDP-4270XD PLASMA TELEVISION TÉLÉVISEUR PLASMA PLASMA-FERNSEHER Discover the benefits of registering your product online at www. Book Page 2 Friday, June 16, 2006 5:32 PM Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. iMPORTANT FOR USE IN THE UNITED KINGDOM. The wires in this mains lead are coloured in accordance with the following code: Green and Yellow : Earth Blue : Neutral Brown : Live If the plug provided is unsuitable for your socket outlets, the plug must be cut off and a suitable plug fitted. [. . . ] Book Page 32 Friday, June 16, 2006 5:32 PM 08 Setting up 7 Press HOME MENU to exit the menu. Note • For the 3DYC, the individual parameters are selectable only when: – You have selected INPUT 1, 2, or 3 as the input source and "Video" as the input signal type (see page 45); or – You have selected INPUT 4 as the input source and have not connected a S-Video cable; or You have selected the analogue tuner. € For the I-P Mode, the individual parameters are not selectable for the following input signals: 480p, 720p@60 Hz, 576p, 720p@50 Hz, 1080p@24 Hz. FOCUS This shifts the apparent direction of the sound upward for more clearly defined sound. Sound STANDARD Treble Bass Balance Reset FOCUS Off Off 2 0 0 Sound adjustments You can adjust the sound quality to your preference with the following settings. Adjust the sound to your preference for the chosen AV Selection option. Note • You cannot set up the sound field for listening with headphones. € If you set up the sound field with headphones connected, the new setting will become effective as soon as you disconnect the headphones. • The effect of this function differs depending on signals. Front Surround This provides three-dimensional sound effects and/or deep, rich bass. Item Treble Bass Balance  button For weaker treble For weaker bass  button For stronger treble For stronger bass 2 3 4 Shifts the audio balance to the Shifts the audio balance to the left right Front Surround Selections Off SRS TruBass (default) Deactivates both SRS and TruBass Reproduces highly effective three-dimensional sound. Provides deep, rich bass using a new technology. Note • You cannot adjust the sound for listening with headphones. € If you perform sound adjustments with headphones connected, the new settings will become effective as soon as you disconnect the headphones. € To restore the factory defaults for all items, press / to select "Reset" in step 3, and then press ENTER. Book Page 33 Friday, June 16, 2006 5:32 PM Setting up 08 Note • You cannot adjust the front surround effect for listening with headphones. € If you change the front surround effect with headphones connected, the new setting will become effective as soon as you disconnect the headphones. € • (WOW) designates a status where the FOCUS is on and TruBass + SRS has been selected for Front Surround. No Signal off The system will be automatically placed into the standby mode if no signal is received for 15 minutes. No Signal Off Selections Disable (default) Does not place the system into the standby mode. Enable Places the system into the standby mode if no signal is received for 15 minutes. Power Control Power Control provides convenient functions for power saving. [. . . ] This adjusts the brightness of the grey side masks according to the brightness of the main image. ) • Panel generated sounds—for example, fan motor noise, electrical circuit humming , glass panel buzzing—are normal operation of a phosphor-based matrix display. € When you change the Energy Save mode, you may notice a change in the panel sound. First turn the main power off by pressing POWER on the plasma television, and then turn the power on again in after one minute or more. [. . . ]