User manual PIONEER PDP-427XD

[. . . ] To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment. This product complies with the Low Voltage Directive (73/23/EEC, amended by 93/68/EEC), EMC Directives (89/336/EEC, amended by 92/31/EEC and 93/68/EEC). When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation. [. . . ] Does not decrease the picture brightness. Slightly lowers power consumption while slightly suppressing the brightness drop level. Decreases the picture brightness and lowers power consumption. To restore the screen display, press any button other than i +/i ­ and e. This setting is not memorized by the system. Audio coming from the main screen is output from the PHONES output terminal. When in the 2-screen or picture-in-picture mode, audio coming from the sub screen is output from the PHONES output terminal. You can also select this function using the Home menu when the input source is a PC. When you change the Energy Save mode, you may notice a change in the panel sound. To adjust the volume for headphones after selecting "Sub", always use the menu item (shown in the procedure) no matter whether the screen is in the single, 2-screen, or picture-in-picture mode. When the screen is in the single mode with "Sub" selected, audio coming from the screen is output from speakers even with headphones connected. Audio from a connected subwoofer is muted when you have selected "Sub" for "Headphone Output" and connected headphones. The system will be automatically placed into the standby mode if no signal is received for 15 minutes. Does not place the system into the standby mode. Places the system into the standby mode if no signal is received for 15 minutes. Five minutes before the system is placed into the standby mode, a message appears every minute. The system may not be placed into the standby mode when noise signals are present at the Plasma Television after a TV programme finishes. The system will be automatically placed into the standby mode when no operation is performed for three hours. Does not place the system into the standby mode. Places the system into the standby mode if no operation is performed for three hours. Five minutes before the system is placed into the standby mode, a message appears every minute. The system will be automatically placed into the standby mode when no signal is received from the personal computer. [. . . ] Check if phones are still in connection with the PHONES output terminal. Sound is reversed between the right · Check if the speaker cable connections have been reversed between the right and left or if the speaker cable and left. Sound is output from only a single speaker. Has the correct screen size been selected? [. . . ]