User manual PIONEER PDP-435XDE

[. . . ] This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/ EEC. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A (Media Receiver)/13A (Plasma Display) fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always refit the fuse cover after replacing the fuse. [. . . ] You can select from among "Auto", "PAL", "SECAM", and "4. 3 Select the first character ( / , / then ENTER). Description You can select the channel using P+/P­. You can select the channel using the Favourite Channel list and P+/P­. You cannot select the channel using P+/P­. To set up for another channel, repeat steps 6 to 14. Manual Adjust also allows you to make selections for "Label", "Child Lock", and "Decoder". Repeat step 3 to enter up to five characters. To correct entered characters, select [ ] or [ ] on the screen, and then press ENTER. To delete the current character, select [Delete] on the screen, and then press ENTER. To put a space for the current character, select [Space] on the screen, and then press ENTER. Child Lock inhibits selected TV channels from being tuned and watched. Use the following procedure to change the sequence of the preset TV programmes. After selecting a channel for label entry (using Programme Entry), perform the following steps. Enter your 4-digit password using buttons 0 ­ 9. 6 Select a new location ( / , / then ENTER). To change a page on the Sort screen in step 6, select 5/ on the screen with / to select a page, and then press ENTER. The above procedure transfers and sets only the shifted channel information to recording equipment such as a VCR or DVD recorder. Use the following procedure to set the time correctly. With "Off" (factory default) selected, you cannot watch any images from the decoder. Enter your 4-digit password using buttons 0 ­ 9. You can select the language to be used for on-screen display such as menus and instructions, from among 12 languages; English, German, French, Italian, Spanish, Dutch, Swedish, Portuguese, Greek, Finnish, Russian and Turkish. [. . . ] When receiving TOP Teletext, you can read a TOP text overview. 3 Press / and / to select the desired block or group When the TOP Over View screen is in display, no other buttons are available than i +/i ­, g, e, and a. Make sure that the Plasma Display and the Media Receiver are connected correctly. In this case, operate the system after first turning off the power of the Plasma Display and the Media Receiver, or unplugging the power cord and re-plugging it in after 1 or 2 minutes. [. . . ]