User manual PIONEER PDP-507XA

[. . . ] To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the equipment. This product complies with the Low Voltage Directive (73/23/EEC, amended by 93/68/EEC), EMC Directives (89/336/EEC, amended by 92/31/EEC and 93/68/EEC). When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation. [. . . ] When the Plasma Television is switched on for the first time after purchase, the initial auto installation is initiated. You can automatically set language, country and channels in successive operations. This section describes how to set up analogue TV channels manually. Enter your 4-digit password using buttons 0 to 9. You can select from among 16 languages; English, German, French, Italian, Spanish, Dutch, Swedish, Portuguese, Greek, Finnish, Russian, Turkish, Norwegian, Danish, Czech, and Polish. You can select from among "B/G", "D/K", "I", "L", and "L'". This function may not achieve a satisfactory result, depending on the conditions of broadcasting signals. When using a decoder with a decoder terminal selected, this function may fail to achieve a good result. You can select from among "Auto", "PAL", "SECAM", and "4. Child Lock inhibits selected TV channels from being tuned and watched. After selecting a channel (using Programme Entry), perform the following steps. You can select the channel using P +/P ­. Select this option to register the channel as your favourite channel. You can select the channel using the Favourite Channel list and P +/P ­. You cannot select the channel using P +/P ­. To set up for another channel, repeat steps 6 to 14. After selecting a channel (using Programme Entry), do the following steps. Manual Adjust also allows you to make selections for "Tuner NR", "Child Lock", and "Decoder". With "Off" (factory default) selected, you cannot watch any images from the decoder. For the individual channels, you can specify whether the Plasma Television should reduce video noise depending on the levels of broadcasting signals. After selecting a channel (using Programme Entry), perform the following steps. You can name TV channels that you have set up, using up to five characters. [. . . ] Check if phones are still in connection with the PHONES output terminal. Sound is reversed between the right · Check if the speaker cable connections have been reversed between the right and left or if the speaker cable and left. Sound is output from only a single speaker. Has the correct screen size been selected? [. . . ]