User manual PIONEER PDP-LX6080D

[. . . ] Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS1362. If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. [. . . ] If you have registered any channel as your favourite one, see Activating the Favourites function and activate the Favourites function. If you have selected any channel for Channel Lock, set Using a password on page 56 and set an appropriate four-digit password. note · The password entry screen does not appear if you have disabled the password function. You can select "DTV Setup" only when watching DTV channels. On the other hand, individual channel settings set to skip in "Channel Options" screen will not be affected by this setting. You can select "DTV Setup" only when watching DTV channels. With this function, parents can prevent their children from watching age-restricted TV programmes. This function becomes effective depending on the country selected for channel setup. You can specify an age limit in the range from 4 and 18, so that the password has to be entered to watch TV programmes that match the specified age limit. With "Off" selected, password entry is not required no matter which age-restricted TV programme is selected. Make sure to activate this function after favourite channels are registered. Enter your four-digit password using buttons 0 to 9. Use the following procedure to change the sequence of the preset DTV channels. With favourite channels registered, you can select them using P+/P­ on the remote control unit or CHANNEL +/­ on the plasma television. note · You can select "DTV Setup" only when watching DTV channels. To change a page on the Sort screen in step 4, select / on the screen with /// to select a page, and then press ENTER. You can select "DTV Setup" only when watching DTV channels. This function lets you skip group of services, such as radio and text data services. You can select from among "Off", "Radio", "Data" or "Both". Use the following procedure to switch between the PCM and Dolby digital audio format. With this function on, the plasma television checks if updated software is available and then downloads it (as necessary). after this , the system executes Add New Channels operation (page 40). [. . . ] Check if you have selected "Enable" in "HD AV Converter" for "HDMI Control Setting" even though no HD AV Converter is connected. Check if the connections are properly made between the plasma television and the device that supports the HDMI Control functions. Check if the connections are properly made between the plasma television and the device that supports the HDMI Control functions. Check if you have an HDMI controlled AV system connected to one HDMI terminal and the recorder or player connected to another HDMI terminal on the plasma television. [. . . ]