Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PIONEER PDR-W739. We hope that this PIONEER PDR-W739 user guide will be useful to you.
Lastmanuals help download the user guide PIONEER PDR-W739.
Detailed instructions for use are in the User's Guide.
[. . . ] COMPACT DISC RECORDER / MULTI-CD CHANGER
PDR-W739
Operating Instructions
IMPORTANT
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
IMPORTANT SAFETY INSTRUCTIONS
READ INSTRUCTIONS -- All the safety and operating
instructions should be read before the product is operated. [. . . ] The instructions here give you a little more control over the recording you make.
5
1
Load the CD you want to copy in to the CD changer.
You can use any of the three disc trays in the changer.
Press the DISC (CD SELECT on the front panel) button for the disc you want to record.
If you want to adjust the recording level, do so here. See Setting the recording level on page 19 for how to adjust it.
2
Load a CD-R or CD-RW into the CD-R tray.
If the disc isn't blank, make sure that there is enough space on the disc for what you want to record (see Switching the Display on page 30 for how to check this).
6
Press COPY START CD =CD-R.
The recorder starts copying the disc. If FINALIZE is on, the recorder will finalize the disc after copying it. Be careful: if there's a playlist programmed, the tracks appearing on the playlist will be recorded. · If the button is blinking, there's not enough space on the disc for what you want to record. Press again to start recording anyway, or press 7 (CD-R side) to cancel.
16
5 Copying CDs
COMPACT DISC RECORDER / MULTI-CD CHANGER OPEN/CLOSE
ÛB¿^/
CD SELECT 1 OPEN/CLOSE
1
0 0 0
3- COMPACT DISC MULTI CHANGER
2 3 COPY START
COMPACT DISC DIGITAL RECORDER
0
2
3
CD=CD-R
COPY MODE
41
¡¢
Copying individual tracks
Here's how to copy individual tracks from any disc in the changer:
4
Press the CD SELECT button for the disc you want to record.
On the remote, use the three DISC buttons.
1
Load the CD(s) you want to copy tracks from in to the CD changer.
You can use any of the three disc trays in the changer.
5
2
Load a CD-R or CD-RW into the CD-R tray.
If the disc isn't blank, make sure that there is enough space on the disc for what you want to record (see Switching the Display on page 30 for how to check this).
Use 4 1 and ¡¢ (CD changer side) to select the track you want to record.
On the remote, use the 4 and ¢ buttons. If you want to adjust the digital recording level, do so here. See Setting the recording level on page 19 for how to adjust it.
3
Press COPY MODE twice.
The display shows Track Copy. If you want to switch the copying speed, do so here. See Changing the copying speed on page 19 for how to change it.
6
Press COPY START CD=CD-R.
The recorder starts copying the track and stops automatically when it's finished. · If you want to now finalize the disc, turn to page 20.
17
5 Copying CDs
Î
DISC 1 DISC 2 DISC 3
$
1 4 7 10/0 2 5 8 >10
PROGRAM
>
OPEN/CLOSE
COMPACT DISC RECORDER / MULTI-CD CHANGER
ÛB¿^/
OPEN/CLOSE
3 6
1
0 0
3- COMPACT DISC MULTI CHANGER
COPY START CD=CD-R
COPY MODE
COMPACT DISC DIGITAL RECORDER
0
2
3
0
AUTO SPACE
9
COMPACT DISC RECORDER/ MULTI-CD CHANGER REMOTE CONTROL UNIT
Copying a programmed selection
You can automate the process of making a mix CD by using the programming function of the disc changer.
If you want to switch the copying speed, do so here. See Changing the copying speed on page 19 for how to change it. If you want to adjust the digital recording level, do so here. See Setting the recording level on page 19 for how to adjust it.
1
Load the CD(s) you want to program tracks from in to the CD changer.
You can use any of the three disc trays in the changer.
5
2
Load a CD-R or CD-RW into the CD-R tray.
If the disc isn't blank, make sure that there is enough space on the disc for what you want to record (see Switching the Display on page 30 for how to check this).
If you want to automatically space the tracks on the recording, press AUTO SPACE.
Switching on automatic spacing makes sure that there's a few seconds of silence between each recorded track.
6
Press COPY START CD =CD-R.
Recording stops automatically after the playlist has finished. If the playlist is longer than the recording time available on the CD-R/CD-RW, recording stops when the end of the disc is reached. · If you want to now finalize the disc, turn to page 20.
3
Program a playlist of tracks you want to record.
For detailed instructions on programming a playlist see Programming a playlist (3-CD changer) on page 25.
4
Press COPY MODE.
The display shows Program Copy.
18
5 Copying CDs
COMPACT DISC RECORDER / MULTI-CD CHANGER
ÛB¿^/
3- COMPACT DISC MULTI CHANGER
CHECK
COMPACT DISC DIGITAL RECORDER
3-CD CONTROL
CD-R CONTROL
REC LEVEL
41
¡¢
7
PUSH ON-OFF
Changing the copying speed
The recorder defaults to double (x2) speed, but if you want to listen to the CD as it's recorded, single (x1) speed is better. 1 Press 4 1 or ¡ ¢ (CD-R side) to switch the copying speed. The COPY indicator shows the selected speed (x1 or x2). Note: when copying or recording at double speed, you can only monitor the recording through the analog outputs, or through a pair of headphones. No signal is output from the digital outputs.
Setting the recording level
When recording commercially produced CDs, the recording level has already been optimized and you don't need to change it. Boosting the level will generally result in distortion where there are peaks in the music. If you're recording a noncommercially produced CD that has been consistently underrecorded, you may need to boost the level. [. . . ] Audio unit
Frequency characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hz to 20 kHz Playback S/N . . . . . . . . . . . . . . . . . . . . . . . . . . 102 dB (EIAJ) (U. S. /Canadian models) 105 dB (EIAJ) (U. K. 95 dB (EIAJ) (U. S. /Canadian models) 96 dB (EIAJ) (U. K. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PIONEER PDR-W739
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PIONEER PDR-W739 will begin.