User manual PIONEER PL-7

[. . . ] Copy new firmware (n-firmware_vX_XX. tar. gz) to a SDHC card or USB memory and put it in the player. <Copy to> SDHC card: Copy in [system] folder USB memory: Copy in root directory Notes · Do not use any application while downloading the file. [. . . ] · The file extension should be ". gz". 2. PL-7 must be in standby (power-off) mode when the SDHC card or USB memory is inserted. If firmware is stored on a SDHC card or USB memory that is recognized by the player, the firmware update will automatically begin. During the update, the LCD front panel display on the player shows "UPDATE SD XX. XX" or "UPDATE USB XX. XX. " Firmware version is displayed as "XX. XX . " The firmware update will be completed in approx. The LCD back light is automatically turned off during the update process. The LCD back light will not light up again even if the keys are pressed. Note: Firmware cannot be updated if the SDHC card or USB memory is write-protected (locked). 4. When the firmware update has been successfully completed, "SUCCESS" is displayed on the LCD front panel of the player. Several minutes are required for firmware to be applied. HD PILOT waits for application of firmware to be completed on the PL-7. Once HD PILOT confirms that application of firmware has been successfully completed, the following message appears: This version number is only an example. Click [OK] button to close the [FirmwareUpdate] screen. HD PILOT and the PL-7 are now connected, and the online functions of HD PILOT can be used. NOTE: Do not turn off the PL-7's power during the process. NOTE: Before executing, insert an SDHC card with at least 40 MB of free space into the PL-7. NOTE: This function cannot be executed with serial connections. [. . . ] NOTE: Before executing, insert an SDHC card with at least 40 MB of free space into the PL-7. NOTE: This function cannot be executed with serial connections. [. . . ]