Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PIONEER PL-J2500. We hope that this PIONEER PL-J2500 user guide will be useful to you.
Lastmanuals help download the user guide PIONEER PL-J2500.
Detailed instructions for use are in the User's Guide.
[. . . ] 2 Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place. Press the detach button and push the front panel upward and pull it toward you. This unit can be properly installed using either front-mount or rear-mount installation. [. . . ] If there is enough space, use the mounting sleeve that came with the vehicle. 1 Nut 2 Firewall or metal support 3 Metal strap 4 Screw 5 Screw (M4 × 8) # Make sure that the unit is installed securely in place. An unstable installation may cause skipping or other malfunctions. Releasing the front panel allows easier access to the trim ring. When reattaching the trim ring, point the side with the notched tab down. 2 Insert the supplied extraction keys into both sides of the unit until they click into place. 1 Determine the appropriate position where the holes on the bracket and the side of the unit match. You can remove the front panel to protect your unit from theft. When installing this unit in a vehicle without an ACC (accessory) position on the ignition switch, failure to connect the red cable to the terminal that detects operation of the ignition key may result in battery drain. -- Place all cables away from hot places, such as near the heater outlet. -- Do not connect the yellow cable to the battery by passing it through the hole to the engine compartment. -- Cover any disconnected cable connectors with insulating tape. -- Never cut the insulation of the power cable of this unit in order to share the power with other devices. Power cord input Microphone input Microphone Rear output Front output Antenna input Fuse (10 A) Wired remote input Hard-wired remote control adaptor can be connected (sold separately). 1 To power cord input 2 Depending on the kind of vehicle, the function of 3 and 5 may be different. In this case, be sure to connect 4 to 5 and 6 to 3. In another type of vehicle, never connect 9 and b. Perform these connections when using the optional amplifier. [. . . ] Perform these connections when using the optional amplifier. It is extremely dangerous to allow the microphone lead to become wound around the steering column or gearstick. Be sure to install the unit in such a way that it will not obstruct driving. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PIONEER PL-J2500
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PIONEER PL-J2500 will begin.
