User manual PIONEER RG-1

[. . . ] Do not allow this unit to come into contact with liquids. Also, damage to this unit, smoke, and overheating could result from contact with liquids. "CLASS 1 LASER PRODUCT" This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. [. . . ] If you turn scan play on during FLD, FSCN appears in the display. 2 When you find the desired track press b to turn scan play off. If the display has automatically returned to the playback display, select SCAN again by pressing F (function). After scanning of a disc (folder) is finished, normal playback of the tracks begins. Note When playing compressed audio, there is no sound during fast forward or reverse. Incompatible text stored with the audio file may not be displayed or may be displayed incorrectly. Depending on the version of iTunes used to write MP3 files onto a disc, comment information may be incorrectly displayed. When playing back VBR (variable bit rate)-recorded WMA files, the average bit rate value is displayed. Using the COMP (compression) and BMX functions let you adjust the sound playback quality of this unit. FF/REV (fast forward/reverse) You can switch the search method between fast forward/reverse and searching every 10 tracks. Selecting ROUGH enables you to search every 10 tracks. # The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds. Wiring that comes into contact with metal parts to protect the wiring. -- Place all cables away from moving parts, such as the gear shift and seat rails. -- Place all cables away from hot places, such as near the heater outlet. -- Do not connect the yellow cable to the battery by passing it through the hole to the engine compartment. -- Cover any disconnected cable connectors with insulating tape. -- Never cut the insulation of the power cable of this unit in order to share the power with other devices. When this unit is on, control signals are sent through the blue/white cable. Connect this cable to the system remote control of an external power amp or the vehicle's auto-antenna relay control terminal (max. If the vehicle is equipped with a glass antenna, connect it to the antenna booster power supply terminal. Never connect the blue/white cable to the power terminal of an external power amp. [. . . ] Select the repeat The repeat play Depending on play range again. Range changes the repeat play unexpectedly. Range, the selected range may change when selecting another folder or track, or when fast forwarding/reversing. NO XXXX ap- No text information embedded pears when a display is changed (e. [. . . ]