User manual PIONEER S-DV505

[. . . ] DVD/CD RECEIVER XV-DV505 SPEAKER SYSTEM S-DV505 Operating Instructions CONGRATULATIONS ON YOUR PURCHASE OF THIS FINE PIONEER PRODUCT. Pioneer is on the leading edge of DVD research for consumer products and this unit incorporates the latest technological developments. We are sure you will be fully satisfied with the DVD player. Thank you for your support. Location: underside of the unit IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] 1 Use the BAND button to select the FM band. 2 Press SYSTEM DISP repeatedly until PTY SEARCH appears in the display. 3 Use the / (cursor up/down) buttons to select the program type you want to hear. 4 Press ENTER to search for the program type. The system starts searching through the station presets for a match. When it finds one, the search stops and the station plays for five seconds. 5 If you want to keep listening to the station, press ENTER within the 5 seconds. If you don't press ENTER, searching resumes. RT Frequency Clock PS PTY PTY SEARCH · If any noise is picked up while displaying the RT scroll, some characters may be displayed incorrectly. · If you see NO DATA in the RT display, it means no RT data is being transmitted from the broadcast station. The display will automatically switch to the PS data display. If no PS data is transmitted from the station, the frequency will be displayed. · In the PTY display, there are cases where NO DATA or NO TYPE is shown. If this happens, the PS display is shown after a few seconds. · This unit converts lower case characters transmitted by broadcast stations to upper case characters. · RDS searches station presets only. 38 En Setting up for surround sound 06 Choosing your surround sound settings To get the best possible surround sound from your system, make the settings below. This is particularly important when using Dolby surround. You should only need to make these settings once (unless you change the placement of your speakers, or sometimes, depending on the disc you're playing). Refer to the following pages for details on each of the settings. 1 Press SYSTEM SETUP (SHIFT+DVD SETUP). 2 Use the / (cursor left/right) buttons to choose the option you want to adjust. It will be easiest to adjust each of the settings in turn, following the order below. The current setting is shown for each option as you cycle through the display. Front speaker distance setting (page 40) Specify the distance from your listening position to the front speakers. Center speaker distance setting (page 40) Specifies the distance from your listening position to the center speaker. [. . . ] 6 Non-slip pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Stem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]