User manual PIONEER S-DVR9SW

[. . . ] RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. To prevent a fire or shock hazard, do not place any container filed with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain D3-4-2-1-3_A_En or moisture. Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. [. . . ] The chapter editing screen appears with thumbnails of each chapter. The following commands are available: · Divide ­ Divide a chapter into two or more new chapters: See Chapter Edit: Divide below. Combine ­ Combine two chapters into one: See Chapter Edit: Combine below. Move ­ Change the order of the chapters: See Chapter Edit: Move below. Once the preview has started, press STOP to return to the chapter edit screen. 4 Press RETURN to get back to the chapter editing options on the left, or select another chapter 5 Select `Back' (or press RETURN) to go back to the main Copy List screen. The Chapter Edit option gives you access to several commands that you can use to edit chapters within a Copy List title. Editing chapters in a Copy List title does not change any actual content on the HDD. It affects only how the chapters appear after copying. You can divide a chapter into as many new chapters as necessary. This command lets you rearrange the chapters within a Copy List title. 1 Use the / / / (cursor buttons) to select the chapter you want to move, then press ENTER. 2 Use the / / / (cursor buttons) to select a new position for the chapter, then press ENTER. You can use all the usual playback controls, including PLAY, PAUSE, scan ( , ), and slow-motion (, ). 3 With `Divide' highlighted , press ENTER to divide the chapter at the current playback position. You can divide the chapter as many times as you want (up to 99 per title). When Frame Accurate is set to Off (see Frame Accurate on page 111), the divide point may move by up to half a second after selecting Divide. This command lets you combine two chapters into one. Using this command you can delete a part of a Copy List title, ideal for cutting out the commercial breaks in a recording made from the TV. 1 Select `Erase Sec' from the Copy List menu options. 2 Use the / (cursor left/right) buttons to select the title you want to erase a section from, then press ENTER. After selecting a title, a screen appears from which you can mark the start and end points of the section to erase. [. . . ] Line 1 (rear), 2 (front), Analog audio (rear) L/R Input level During audio input . This connector sends/receives video and audio signals to/ from a compatible colour TV, monitor, VCR, etc. Note: The specifications and design of this product are subject to change without notice, due to improvement. Automatisch starten met opnemen vanaf een satellietontvanger of andere set-top box Wanneer een satellietontvanger of andere set-top box op de AV2(LINE 1/DECODER) ingangen van deze apparatuur is aangesloten, kunt u automatisch starten en stoppen met opnemen overeenkomstig de timerinstellingen van de set-top box. [. . . ]