User manual PIONEER S-LF3-F

[. . . ] As the colours of the wires in the mains lead of this appliance may not correspond with coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red. Do not connect either wire to the earth terminal of a three-pin plug. NOTE After replacing or changing a fuse, the fuse cover in the plug must be replaced with a fuse cover which corresponds to the colour of the insert in the base of the plug or the word that is embossed on the base of the plug, and the appliance must not be used without a fuse cover. [. . . ] There's another menu, the TIMER menu, which is available in any mode. From the timer menu you can set the clock, as well as use the wake up, record and sleep timer features. To display this menu, use the TIMER button instead of the MENU button. This system has a built in clock, which needs to be set to be able to use the timer features. After pressing SET, the display changes for you to set the time. 4 Use 4 and ¢ to set the hour, then press SET. You can choose to display the clock and timer settings in 12-hour or 24-hour format. 1 If the system is on, press to put it into standby. The basic controls for playing discs are covered here. Further functions are detailed in the next chapter. 1 Press STANDBY/ON (remote or front panel) to turn on the system. Setting the repeat mode to REPEAT ALL plays the tracks in the playlist over and over. In repeat track mode, just the current track in the playlist repeats. Using random play To have the CD player play the tracks on a disc in a different order each time you play the disc, use the random play function. Each track will play just once, but the order will be random. When all tracks have been played, the disc stops. Pressing 7 during random play stops playback, and random play mode is cancelled. You can use either of the repeat modes together with the random play mode. Setting the repeat mode to REPEAT ALL endlessly plays all the tracks on the disc at random. In repeat track mode, just the current randomly selected track repeats. You can choose to display various kinds of information during playback and stop modes. switch between them by pressing the DISP button. [. . . ] Pioneer disclaims all liability arising in connection with the use of shaped CDs and DVDs. Incorrect use can be mistaken for trouble or malfunction. If you think there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. [. . . ]