User manual PIONEER S-X360

[. . . ] 5. 1ch Surround System HTP-GS1 SX-X360 S-X360 Audio Multi-channel Receiver Subwoofer Speaker System Discover the benefits of registering your product online at www. pioneer. co. uk (www. pioneer-eur. com). Operating Instructions IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_En-A WARNING This equipment is not waterproof. [. . . ] 1 Press SOUND. 2 Use the / (cursor left/right) buttons to select DIALOGUE then press ENTER. 3 Use the / (cursor up/down) buttons to select the amount dialogue enhancement then press ENTER to confirm. Select between OFF, MID or MAX. 9 SOUND TV/DVD SURROUND ADVANCED S. RETRIEVER + INPUT CHANNEL + VOLUME DISPLAY ­ ­ RDS DISP AXD7442 Using Quiet and Midnight listening modes The Quiet listening feature reduces excessive bass or treble in a sound source. The Midnight listening feature allows you to hear effective surround sound of movies at low volume levels. 1 Press SOUND. · While listening to a stereo source, press S. RETRIEVER. Press repeatedly to switch between: · RTRV ON -- Switches the Sound Retriever on. · RTRV OFF -- Switches the Sound Retriever off. Listening with Acoustic Calibration EQ You can listen to sources using the Acoustic Calibration EQ set in Using the Auto MCACC setup for optimal surround sound on page 16. / / TIMER REC REC MODE 2 Use the / (cursor left/right) buttons to select TONE then press ENTER. 3 Use the / (cursor up/down) buttons to select QUIET or MIDNIGHT then press ENTER to confirm. · To cancel the Quiet or Midnight listening modes, select BASS/TRE. SET UP /TUNE+ SR+ ONE TOUCH COPY 1 /ST­ ENTER 3 /ST+ MENU Adjusting the bass and treble Use the bass and treble controls to adjust the overall tone. 2 Use the / (cursor left/right) buttons to select TONE then press ENTER. 3 Use the / (cursor up/down) buttons to select BASS/TRE then press ENTER. · Selecting BASS/TRE cancels the Quiet and Midnight listening modes. These modes cannot be used at the same time. 4 Use the / (cursor left/right) buttons to select BASS or TREBLE; use the / (cursor up/down) buttons to adjust the sound then press ENTER to confirm. MCACC SOUND /TUNE­ TEST TONE VIDEO IN 9 SURROUND ADVANCED 0 JUKE BOX + INPUT CHANNEL + VOLUME DISPLAY ­ ­ RDS DISP 1 Press SOUND. 2 Use the / (cursor left/right) buttons to select MCACC EQ then press ENTER. 3 Use the / (cursor up/down) buttons to switch EQ ON or EQ OFF then press ENTER to confirm. · On the EQ OFF setting, equalization is set to off and speaker settings (channel delay and channel level) remains as it is set. · Acoustic Calibration EQ is set to on automatically after Auto MCACC setup is used. 20 En Listening to your system 05 Boosting the bass level There are two bass modes you can use to enhance the bass in a source. English 1 Press SOUND. 2 Use the / (cursor left/right) buttons to select BASSMODE then press ENTER. 3 Use the / (cursor up/down) buttons to select the sound then press ENTER to confirm. Select between OFF, MUSIC or CINEMA. 21 En 06 Listening to the radio Chapter 6 Listening to the radio Listening to the radio The tuner can receive both FM and AM broadcasts, and lets you memorize your favorite stations so you don't have to manually tune in every time you want to listen. Select FM AUTO above to switch back to auto-stereo mode (the stereo indicator ( ) lights when receiving a stereo broadcast). Improving poor AM sound The simplest way to improve the sound quality of AM radio is to make sure that the TV in the room is switched off. Also try changing the position and direction of the AM loop antenna. AUDIO SUBTITLE ANGLE PLAY MODE / / TIMER REC REC MODE SET UP /TUNE+ SR+ TUNER 3 /ST­ ENTER /ST+ MENU Changing the noise cut mode If you find that the sound quality is bad even after trying the above, you may be able to improve it using a different noise cut mode. Just choose the one that sounds best. MCACC /TUNE­ TEST TONE VIDEO IN 7 SURROUND ADVANCED 9 SOUND 0 JUKE BOX 1 Tune to an AM radio station then press SETUP. + INPUT CHANNEL + VOLUME DISPLAY 2 Use the / (cursor left/right) buttons to choose NOISECUT then press ENTER. 3 Use the / (cursor up/down) buttons to select a Noise cut mode (1, 2 or 3) then press ENTER. 1 Press TUNER to switch to the tuner, then press repeatedly to select the FM or AM band. [. . . ] · Try switching the unit off then on again. If the error still appears, please contact a Pioneer authorized service center or your dealer. 33 En 09 Additional information Specifications SX-X360 Audio Multi-channel Receiver Subwoofer · Amplifier section RMS Power Output: Front, Center, Surround. . . . . . . . . . . . . . . . . . . . . . . . . 100 W per channel (1 kHz, 10 % T. H. D. , 4 ) Subwoofer . . . . . . . . . . . . . . . . . . . . . . . 100 W (100 Hz, 10 % T. H. D. , 4 ) S-X360 Speaker system (Front speakers x2, surround speakers x2, center speaker x1) · Front speakers Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Closed-box bookshelf type (magnetically shielded) System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7. 7 cm 1-way system Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7. 7 cm cone type Nominal impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Hz to 20 kHz Maximum input power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]