User manual PIONEER SA-8500 service manual

[. . . ] It should also be noted that this phenomenon tends to occur more easily soon after the product is purchased. If programs such as terrestrial digital broadcasts having a screen size of 4:3 are viewed 15:00 PROTV 15:00 PROTV repeatedly, the normal display area other than the black bands on the left and right sides of the screen becomes susceptible to burning. If cinema-size images are repeatedly viewed in their original size, the normal display area other than the black bands at the top and bottom of the screen becomes susceptible to burning. If programs containing a time display or station name displayed on the screen are viewed for a long period of time (or viewed repeatedly), the displayed characters may be easily burned onto the screen. [. . . ] This setting is shared by both the external and TV input sources. sharp imaging with the maximum contrast. Note that this mode does not allow manual image quality adjustment. This setting is shared by both the external and TV input sources. This setting is shared by both the external and TV input sources. This setting is shared by both the external and TV input sources. lowers image brightness for easier viewing. This setting is shared by both the external and TV input sources. allows the user to customize settings as desired. You can set the mode for each input source. For a PC source or when the Home Gallery function is on, the following screen appears: You can set the mode for each input source. If you want to exit the menu without performing the adjustments (or leaving the settings disabled) on the "After" screen, switch to "Before" and then exit. note · You cannot adjust any item while on the "Before" screen. When you switch to another parameter, make sure to change the display from "Before" to "After" first, otherwise you cannot select "Before". A warning message appears if you don't. If you exit the selection from the "Before" screen, the previous entry is stored in the memory and the button no longer works. If you exit the selection from the "After" screen, the new entry is stored in the memory and the button no longer works. If you move and change the "AV Selection" parameter, the new entry in the current parameter is stored in the memory and the button continues to work. You cannot compare images between different parameters on the "AV Selection" menu ("STANDARD" and "MOVIE", for example). When you select this function, "Intelligent Mode" for "Pro Adjust" on the "Picture" menu, "OPTIMUM" on the "AV Selection" menu and "Room Light Sensor" on the "Option" menu are all set to off and image quality returns to default settings. This function is not selectable: - when you select "AV Selection", - when you select "Yes" or "No" on the confirmation screen for "Reset" from the "Picture" menu or - when you select a menu from the PC source This works for both video and still images. This works for both video and still images. [. . . ] Check if the connections are properly made between the plasma television and the device that supports the HDMI Control functions. Check if the connections are properly made between the plasma television and the device that supports the HDMI Control functions. Check if the connections are properly made between the plasma television and the device that supports the HDMI Control functions. Check if the connections are properly made between the plasma television and the device that supports the HDMI Control functions. [. . . ]