User manual PIONEER SA-9800

[. . . ] To prevent fire hazard, the openings should never be blocked or covered with items (such as newspapers, table-cloths, curtains) or by operating the D3-4-2-1-7b_A_En equipment on thick carpet or a bed. Before plugging in for the first time, read the following section carefully. The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the area where this unit will be used meets the required voltage (e. [. . . ] Also note that during DVD playback, when you connect a mic sound settings are automatically switched to STEREO playback and the player downmixes multichannel sources to 2. These features are only available with the DVD/CD or USB input functions. 2 Depending on the microphone level, the sound of the disc may distort. 3 You cannot adjust SFC modes, tone controls (bass, treble, and bass boost), Extra Power mode, Front Surround mode, MP3 Expander mode or Voice Enhancer mode when a microphone is plugged in. 4 This feature is not compatible with DTS signals. You can adjust the following settings: · Contrast ­ Adjusts the contrast between light and dark (­16 to +16) · Chroma Level ­ Adjusts how saturated colors appear (­9 to +9) Adjust the Brightness, Contrast, Hue and Chroma Level settings using /. Settings: High, Medium, Low, Off (default) When watching Dolby Digital DVDs at low volume, it's easy to lose the quieter sounds completely -- including some of the dialog. Switching Audio DRC (Dynamic Range Control) to on can help by bringing up the quieter sounds, while controlling loud peaks. How much of a difference you hear depends on the material you're listening to. If the material doesn't have wide variations in volume, you may not notice much change. From the Video Adjust screen you can adjust settings that affect picture presentation. If there is a language selected on the disc, it is played. Select to choose a language other than the ones displayed (see Using the language code list on page 47). If there are English subtitles on the disc they are displayed. the subtitle language selected on the disc is displayed. Select to choose a language other than the ones displayed (see Using the language code list on page 47). DVD disc menus are displayed in the same language as your selected subtitle language, if possible. DVD menus are displayed in the selected language, if possible. Select to choose a language other than the ones displayed (see Using the language code list on page 47). Subtitles are displayed in your selected subtitle language. Subtitles are always off by default when you play a DVD disc. What it means on-screen displays of the player are in English. [. . . ] In this case, use the TV's own video input settings to select RGB, if possible. Color problems occur with your monitor after changing the HDMI Color setting (page 30). You cannot adjust SFC modes, tone controls (bass, treble, and bass boost), MP3 Expander mode, Voice Enhancer mode when using Extra Power mode. An operation is prohibited because DVD/CD or USB isn't selected, headphones are connected, or SHIFT+TEST TONE is pressed during disc playback. [. . . ]