User manual PIONEER SBX-300

[. . . ] Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference. Operating Environment D3-4-2-1-1_B1_En WARNING Operating environment temperature and humidity: +5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light) D3-4-2-1-7c*_A1_En This equipment is not waterproof. To prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture. [. . . ] ) Note • The pairing method may vary depending on the type of Bluetooth device. • When 5 minutes elapse in pairing mode , the unit enters connection standby mode. To perform pairing again, press BT AUDIO on the remote control. Enjoying music on Bluetooth®devices Music on Bluetooth devices such as the following can be enjoyed wirelessly with the unit. € Bluetooth devices: Cell phone • Bluetooth devices: Digital music player 14 En Operations 4 Play music using your Bluetooth device. For details on the playback procedure, see the operating instructions for your Bluetooth device. Note • The unit does not support the AVRCP function. € The unit does not support the Mono Headset Profile (Hands Free Profile). € Bluetooth devices cannot be controlled by the unit. € Only one Bluetooth device can be connected to the unit at one time. Connection with multiple devices is not possible. € The Bluetooth function may not be able to be used depending on the type of Bluetooth device (to play a Bluetooth device with the unit, the Bluetooth device needs to support the A2DP profile). • The BT AUDIO indicator flashes when there is no Bluetooth connection. € The audio may sound choppy if signals from other devices interfere with the connection. € The Bluetooth connection will be lost if a malfunction occurs due to the effect of a device that operates in the same frequency, such as a medical device, microwave, or wireless LAN device. € If communication is cut off because of objects between the Bluetooth device and the unit, the Bluetooth connection will be lost. € Large distances between the Bluetooth device and the unit will result in poorer sound quality, and the connection will be cut off if the distance between the Bluetooth device and the unit exceeds the operating range. € If the power of the unit is turned off, the connection with the Bluetooth device will be disconnected. € The sound retriever function* is always on. * A function that corrects music data compressed at a high rate to enable playback with better sound quality. Other Functions 15 En Chapter 4 No PHASE CONTROL technology Front speaker Listening position Other Functions PHASE CONTROL technology PHASE CONTROL technology is used with this unit. During multi-channel playback in a typical home theater, the LFE (Low Frequency Effects) signals and low-pitched components contained in various channels are routed to the subwoofer or other optimum speaker. [. . . ] About condensation If this unit is moved suddenly from a cold place into a warm room (in winter, for example) or if the temperature in the room in which this unit is installed rises suddenly due to heater operation, etc. , water droplets (condensation) may form inside (on operating parts and the lens). When condensation is present, this unit will not operate properly and playback is not possible. Let this unit stand at room temperature for 1 or 2 hours with the power turned on (the time depends on the extent of condensation). [. . . ]