User manual PIONEER SC-2023-K

[. . . ] Symbol examples for batteries By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. These symbols are only valid in the European Union. For countries outside the European Union: If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. [. . . ] If the image doesn’t match your monitor type, adjust the aspect ratio on the source component or on the monitor. This setting is only displayed when 480i/p or 576i/p video signals are being input. À 　 　 　 d (The image is only an example for checking the effect. C HUE <d, e> c –6 to +6 d Default: 0 0 d (The image is only an example for checking the effect. ) Adjusts saturation from dull to bright. C CHROMA (Chroma Level) <d, e> c –6 to +6 d Default: 0 0 d (The image is only an example for checking the effect. ) BLK SETUP (Black Setup) <f> Sets the black level according to the video input signal. If the black level is too bright due to the combination with the connected monitor, select 7. 5 64 09 Switching the speaker terminals If you selected Normal(SB/FH), Normal(SB/FW) or Speaker B at Speaker system setting on page 83, you can switch between speakers using the SPEAKERS button. If you selected Front Bi-Amp or ZONE 2, the button will simply switch your main speaker terminals on or off. Using other functions Using the MULTI-ZONE controls The following steps use the front panel controls to adjust the sub zone volume and select sources. When the receiver is on, make sure that any operations for the sub zone are done while ZONE and your selected sub zone(s) show in the display. If this is not showing, the front panel controls affect the main zone only. If the receiver is in standby, the display is dimmed, and ZONE and your selected sub zone(s) continue to show in the display. À 　 　 　 3 Use the INPUT SELECTOR dial to select the source for the zone you have selected. For example, ZONE 2 DVD sends the source connected to the DVD inputs to the primary (ZONE 2) sub room. If you select TUNER, you can use the tuner controls to select a preset station (see Saving station presets on page 44 if you’re unsure how to do this). The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also changes the station in the other zone. Please be careful not to change stations when recording a radio broadcast. 4 Use the MASTER VOLUME dial to adjust the volume for the sub zone. When Speaker System is set to anything other than ZONE 2, the volume output from the receiver’s AUDIO ZONE 2 OUT terminals can be fixed to –40 dB or 0 dB and the volume can be adjusted from the connected amplifier. [. . . ] 104 14 Bluetooth function Bluetooth wireless technology A short-range wireless communications standard for digital devices. Information is exchanged between devices several meters to several tens of meters apart using radio waves. 4 GHz band which does not require applications for licenses or usage registration for applications conducting wireless exchange of digital information at relatively low speeds, such as computer mouses and keyboards, mobile phones, smartphones, text and audio information for PDAs, etc. Additional information Pairing “Pairing” must be done before you start playback of Bluetooth wireless technology content using the Bluetooth ADAPTER. [. . . ]