User manual PIONEER SC-LX82

[. . . ] Operating Instructions SC-LX82 audio/video multi-channel receiver SC-LX7 2 IMPORTANT CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. D3-4-2-1-1_A1_En Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel. IMPORTANT: THE MOULDED PLUG This appliance is supplied with a moulded three pin mains plug for your safety and convenience. [. . . ] This is valid as an HDMI function for PQLS-compatible players. · PQLS OFF ­ PQLS is disabled. Setting the PQLS function PQLS (Precision Quartz Lock System) is a digital audio signal transfer control technology using the KURO LINK function. It offers higher-quality audio playback by controlling audio signals from the receiver to a PQLS compatible player, etc. This enables removing jitter that has a negative effect on the quality of the sound and is generated upon transmission. · On players compatible with PQLS Multi Surround, PQLS works for all sources. Set the player's audio output to Linear PCM. · On players compatible with PQLS 2 ch Audio, PQLS only works when playing CDs. Please refer to the operating instructions supplied with your player for more information. This function is activated when KURO LINK is set to ON. SC-LX82: SEARCH HOME MENU iPod CTRL RETURN TUNE PHASE CTRL MPX PQLS CH LEVEL STATUS TV SOURCE RECEIVER THX AUTO/ALC/ DIRECT CH VOL STEREO STANDARD ADV SURR VOL PGM MENU DIMMER AUDIO TVCONTROL SIGNAL SEL SLEEP SC-LX72: THX PHASE CTRL STATUS TV/DTV MPX PQLS AUDIO INFO DISP CH MULTI OPE TV CTRL RECEIVER REMOTE SETUP 1 Set the remote control to the receiver operation mode, then press PQLS to select PQLS setting. The setting is displayed on the front panel display. 83 En 08 KURO LINK Canceling synchronized amp mode Before using synchronization Once you have finished all connections and settings, you must: 1 Put all components into standby mode. · When the synchronized amp mode is canceled, the receiver's power turns off if you were viewing an HDMI input or a TV program on the TV. · When in the synchronized amp mode, the synchronized amp mode is canceled when the receiver's power is turned off. To turn the synchronized amp mode back on, select the synchronized amp mode using the TV's remote control. · When in the synchronized amp mode, the synchronized amp mode is canceled if an operation that produces sound from the TV is performed from the TV's menu screen, if the receiver's HDMI output setting is changed, etc. 2 Turn the power on for all components, with the power for the flat screen TV being turned on last. 3 Choose the HDMI input to which the TV is connected to this receiver, and see if video output from connected components displays properly on the screen or not. 4 Check whether the components connected to all HDMI inputs are properly displayed. Synchronized amp mode The synchronized amp mode can be set from the KURO LINK-compatible TV's remote control. See the explanation below for operations in the synchronized amp mode. These functions are set from the TV's menu screen. For more information, refer to the operating instructions of the KURO LINK-compatible TV. Synchronized amp mode operations When using the synchronized amp mode, the KURO LINK-compatible component connected to the receiver operates in sync as described below. · The receiver's volume can be set and the sound can be muted using the TV's remote control. · When the TV's power is set to standby, the receiver's power is also set to standby. (Only when the input for a component connected to the receiver by HDMI connection is selected or when watching the TV) · The receiver's input switches automatically when the KURO LINK-compatible component is played. [. . . ] AC 220 V to 230 V, 50 Hz/60 Hz Power consumption . 0. 4 W (KURO LINK OFF) 0. 6 W (KURO LINK ON) Dimensions . 420 (W) mm x 200 (H) mm x 460 (D) mm Weight (without package). 18. 5 kg Furnished Parts Number MCACC Setup microphone (APM7009). [. . . ]